Tag Archives: gear coupling

Chemical China in Kanpur India gear coupling manufacturers manufacturer Oil in Kakinada India falk 1035g20 near me Fuel Petroleum Transfer Gear Oil Pump with High Temperature with top quality lowest price

Chemical China in Kanpur India gear coupling manufacturers manufacturer Oil in Kakinada India falk 1035g20 near me Fuel Petroleum Transfer Gear Oil Pump with High Temperature with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

1.Product Description

The series KCB/2CY gear oil pumps possess the advantages of simple and compact structure, easy operation and simple maintenance. The series KCB gear oil pumps are suitbble for transporting various oils such as petroleum, diesel and lubricant oils. When using copper gears, the pumps can converfluids with low flash points such as gasoline and benzene ate temperature below 70º C.

They are widely used in oil reservoirs, piers, ships, mining sites, factories and farms. The series 2CY gear oil pumps are mainly used for transporting viscous lubricants for mechanical equipment. When equipped with stainless steel gears, the pumps c EPT cooking oils or beverages.

2.Pump Technical Parameters

1, Flow rate: 18.3~2500 l/min

2, Suction distance: 5 m

3, Outlet diameter: 3/4″- 8 “

4, Outlet pressure: 0.28 – 1.45 MPA

5, Motor power: 1.5 KW-75 KW

3.Models Specifications for Clients Choosing(More Information Pls Contact Us)

 

Model Size Flow (L/min) Pressure (Mpa) Power (Kw) Speed (rpm)
KCB18.3 3/4″ 18.3 1.45 1.5 1400
KCB33.3 3/4″ 33.3 1.45 2.2 1420
KCB55 1″ 55 0.33 1.5 1400
KCB83.3 1 1/2″ 83.3 0.33 2.2 1420
KCB83.3 1 1/2″ 83.3 0.5 3 1450
KCB200 2″ 200 0.33 4 1450
KCB200 2″ 200 0.6 5.5 1450
KCB200 2″ 200 1.0 7.5 1450
KCB300 3″ 300 0.36 5.5 1450
KCB483.3 3″ 483.3 0.36 7.5 1450
KCB483.3 3″ 483.3 0.6 11 1450
KCB633 4″ 633 0.28 11 970
KCB960 4″ 960 0.28 18.5 1470
KCB1200 6″ 1200 0.6 37 740
KCB1600 6″ 1600 0.6 45 980
KCB1800 8″ 1800 0.6 55 740
KCB2500 8″ 2500 0.6 75 980

4.Pump Structures

5.Spare Parts Show

6.Product Advantages

1.Driving Gear Passive Gear
The active / passive gear after high temperature quenching, ion carburizing lime chloride. Gear has a stronger hardness, wear resistance, high temperature resistance, etc.. Can extend the service life of the gear.

2.High Temperature Bearing
High temperature bearings can bear larger load torque, under high temperature, good stability, high bearing capacity, withstand high temperatures. Wear small, long life. DEFU gear KCB18.3-KCB83.3 is the sliding bearing, KCB200 above is the rolling bearing.

3.Mechanical Seal
Carbide mechanical seal, with good heat resistance and impact resistance, friction coefficient is small, self lubricating performance, reliable performance, no leakage, high temperature resistance, wear resistance, corrosion resistance.

4.Integral Coupling
DEFU high temperature gear pump uses the integral coupling, safe and reliable, the concentricity is good, the service life is long, under the heavy load operation bears the torque ability to be strong.

5.100% Copper Motor
DEFU gear pump matching 100% copper motor, stable operation, low calorific value, output power standards, long service life.

6.Certificate of Inspection
DEFU out of the factory every gear pump has been strictly tested, and equipped with a certificate, manual, test data report, the ship with the Chinese classification society CCS certificate.

7.Product Details(Warmly Welcome To Contact Us)

8.Applications

KCB type gear pump is suitable for transporting heavy oil, mechanical oil, fuel oil and solid material, fiber, oil, chemical products, etc.. The pump is equipped with a safety valve to prevent damage to the pump and motor caused by overload.

9.Our Factory

Welcome to visit our factory!
All My Striving,For Your Satisfaction.
*********************************************************************************************
Head Office: HangZhou DEFU Machinery Co.,Ltd
Subsidiary Factory Name:ZheJiang Y&L Pump Co.,Ltd
Mobile :+86 -1857130095    Fax: 0086-571-88220971: +86~571-8822571/88220973-86553150
 

WebSite:

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Chemical China in Kanpur India gear coupling manufacturers manufacturer Oil in Kakinada India falk 1035g20 near me Fuel Petroleum Transfer Gear Oil Pump with High Temperature with top quality lowest price

Hitachi China in Bhavnagar India face gear coupling supplier Hydraulic in Salem India falk 1015g20 supplier Spare Parts for Hpv118 Used in Construction Machinery with top quality lowest price

Hitachi China in Bhavnagar India face gear coupling supplier Hydraulic in Salem India falk 1015g20 supplier Spare Parts for Hpv118 Used in Construction Machinery with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

 

This table lists the company’s sale of most of products.
Series/Part no. Description
(1)  Rexroth / Uchida Rexroth A2FO/A2FM/A2FE10-250, A2F12-500, A2VK5-55MA, A6V28-250, A7/8V28-500, A8V80-107  
  A6VM/A7VO28-500, Uchida A8VO55-200  
  A4VSO40-500, A4V40-250, A4VG28-250,  A10VSO18-140,  A10VG28-63  
  Uchida AP2D12-38,  A10V/VD/E40-43, Rexroth A11VG50,  A11VO40-260, A20VLO260  
   
(2)  Vickers PVB/MPVB5-110, PVQ10-32, MFB5-29,  PVE19-21,  PVH45-141, PVD45, PVM571,
  PVXS130-250
(3)  Eaton 3321,  3932,  4621,  5421,  6423,  7621, 78462  
(4)  Sauer Sundstrand SPV14-18, PV20-27, MPV046, PV90R30-250  
(5)  Caterpillar VRD63, AP12-14, 320C, SPK10/10, SPV10/10  
  E200B new, 12G, 14G, 215, 245, 330B, PSV450, 992/963  
(6)  Liebherr LPVD45 / 64 / 90 / 100 / 125 / 140 / 250 / 260  
(7)  Linde HPR75/100/130/160, B2PV35-140, BMF50-105, BPV35-70, BMV75.27, BPR140/186/260  
(8)  Parker / Volvo F11-005 / 571 / 150 / 250,  F12-060 / 080 / 110  
(9)  Kawasaki / Teijin Main pumps: K3SP36C, K3V63-280, K5V80-200, NV64-270, NX15, NVK45, KVC925-932  
  Swing motors: M2X63-210, M5X130-180, MX150-500  
  Travel motors: MAG150-170, GM05/06VL, GM05/07VA, GM08-23/30H/35VA/35VL/38VB, DNB08  
(10)  Komatsu Main pumps: HPV35/55/90/95/132/160, PC40-8, PC60-7, PC100/200/300/360/400  
  Swing motors: PC45R-8, 60-6/7, KMF40-105, KYB33-87, PC200-6/7, 300, 400, 650  
  Travel motors: HPV105  
(11)  Hitachi Main pumps: HPV091 / 102 / 116 / 125B / 145  
  Swing motors: EX120-2/5  
  Travel motors: HMGC32 / 35, HMGE36, EX550-3  
(12)  Toshiba Swing motors: SG02 / 571 / 04 / 08 / 12 / 571, PVC90R, PV090  
(13)  Kayaba / Sumitomo MSG-27P/44P, MSF-85, MAG-33VP, JMV-53/34, PSVD2-21E/26E, PSV2-55T, 280  
(14)  Kobelco Travel motors: SK200-1/3/6, SK220-2/3 (MA340), SK320 & SK430  
(15)  Nachi PVD-2B-32L / 34 / 34L / 36L/38/40/42, PVK2B-505, YC35-6  
(16)  Kato Travel motors: HD400 / HD450V-2 / HD1571 / HD3000  
(17)  Tokiwa MKV23 / MKV33
(18)  Bobcat 331 & 337
(19)  Hawe V30D95-250, V60N
(20)  Tadano Tadano 100, 150
(21)  Denison PV29-74
(22)  Parker Parker BMHQ30/PV092/140/180  
Rotary group parts for hudraulic piston pump,meet with special market,
advanced technology,perfect design,top quality    

Our company can supply a large number of  piston pump (motor) accessories, Specific models are as follows:

 We sell the  hydraulic piston pump (motor) which currently has more than 1185 kinds of varieties and reducer assembly parts varieties has more than 12367 kinds of (including plunger sliding boots, cylinder, oil distribution plate, swing, variable piston, drive shaft, skeleton oil seal, gear pump, rod, pressure plate, central shaft, spindle, inclined plate, the ball hinge spring, ball joint, back plate, the thrust plate, friction plate, separator, oil distribution disc plug, bushing spring and other parts).We believe there is always a product that you will need.
 
Product Description:

 

More brands of pumps parts:

EPT EXCAVATOR SERIES:
HPV35 (PC60); HPV55 (PC120); HPV90 (PC200-3); HPV90 (PC200-5); PHV95 (PC200-6, PC120-6 in addition to the pump shaft). HPV132 (PC300-7, PC400-6); HPV160 (PC300/400-3/5); HPV135; PC30UU; PC40-8 main pump; PC50 (PC55/56); PC60-7 main pump (HPV75); PC160; PC200-2 (main pump); PC200-8 main pump/PC240-8 main pump; PC320; PC360-7 main pump (PC300-7); PC400-7 main pump; PC1250 main pump; PC45R-8 rotation; PC60-6 rotation; PC60-7 rotary; PC120-6 rotation; PC200 – six rotary/LMF45; PC200-7 rotary motor; PC450 rotation; PC300-6 rotation; PC200-7 walk; PC400-7 walk; HPV220-8 rotation; PC650 rotary.

 

CAT SERIES:
VRD63 (CAT120) double pump; SBS80 (CAT312C) main pump; E200B (new) double pump; AP – 12 double pump; AP-14 (CAT325C); CAT320C double pump; SPK10/10 (E200B) double pump; SPV10/10 (MS180) double pump; CAT12G; CAT14G / 16 g; CAT215; CAT245; Walking CAT330B motor; Walking PSV450 (AP-12); CAT992; CAT330C walk; CAT385H.

 

KYB SERIES:
PSVD2-16 e (1.6 2 tons of sunvo intelligent); PSVD2-21 c (KYB); PSVD2-21 e (KYB) 4 t/SVD22 little dig primary pump; 27 PSVD2-26 e/e (KYB); KYB – 25 cc (45 ishikawa island, long yasuda K040 / K045); Ishikawa island 60; PSVL-54 (yasuda KYB long 6 tons of 155 drivers); PSVK2-25; KMF40; KMF40-2; KMF90 (KPV90) PC200-1/2/3 (rotary, walking); KMF105; KYB33; KYB36; KYB37; KYB87; KYB90 (MSG – 60 p); MSG – 27 p (KYB)/LSGMF27/10 w; MSG-44 p (KYB)/LSGM44/10 w-R21; MAG-vp-480-e-2 (4-5.5 tons of small excavators walking motor); MSF-85 (instead of ZF motor); PSV2 sumitomo 120-55 t (KYB); Sumitomo 280 rotary; V25..

NACHI SERIES:
PVD-2-b-32 l; PVD-2-b-34 walk; PVD-2-b-34 l (small dig primary pump); PVD 38/40-2-36 b/l; PVD-2-b-42; PVD -2-b-63; PVD45; Nachi 130; PVK-2-b-505 (ZAX55 main pump); YC35-6 yuchai little dig a rotary motor; YC35-6 yuchai little dig walking motor; PCLS 18-200-b (yuchai 55 rotary); The bobcats 331 drivers (rotary); The bobcats 337 walking (motor).

TOSHIBA SERIES:
SG02; SG571 (MFB40); SG04 (MFB80); SG08 (MFB160); SG12; SG20 (MFB250); PVB92 (PVC90RC08 / PVC70R) (8.5 tons of drivers Toshiba 8 tons, yuchai); PV090; PV092 (PV080 gm); PSVS – 90.

JIC SERIES:
JMV-44/22; JMV-53/34 (6 to 8 tons of small excavator walking motor); JMF-64; JMV147/95; JMF-151-VBR (22 sm1510117); JMF-155.

LIEBHERR SERIES:
LPVD45; LPVD64; LPVD75; LPVD90; LPVD100; The new LPVD100 (914); LPVD125; The new LPVD125; LPVD140; LPVD250; LPVD260.

KOBELCO/KATO SERIES:
SK250-8 main pump; SK200 – a third walking motor; SK220-3 (MA340 walking motor); SK200-6 walking motor; SK200-6 new walking; Walking SK320 motor; M3V150 (SK220-2) walking motor; Walking SK430 motor; Kato 400 drivers motor; HD450V – 2 (kato); HD3000; DH55 55 drivers rotary motor (daewoo); T3X128 / daewoo 300-7 rotary; Daewoo walk 225-7; Daewoo DH370 rotation; Modern 60-7 rotary motor; Modern 480 rotary motor.

KAWASAKI SERIES:
K3SP36C (SDV36) 8 tons medium-sized drivers main pump; K3V63DT (K3V63BDT); K3V112DT; K3V140DT; K3V180DT; K3V280; K3VG280; K3VG180; K3VL45; K5V80; K5V140 (doosan 300-7); K5V160 (modern 300-6 main pump); K5V200 (450/470 in Japan, god steel 470, Keith 480 main pump); K7V63; NV64; NV84; NV111DT; NV137; NV172; NV270; NX15; NVK45 steel drivers (god); KVC925; KVC930; KVC932.

KAWASAKI SWING SERIES:
M2X63; M2X96 (EX200-2); M2X120; M2X146 (EX200-5); M2X150/170 (EX400); M2X210 (EX270/280/300); M5X130 (CAT320C); M5X180 (steel 350-8 god); MX150; MX173; MX500; MAG150; MAG170; LZV30; LZV120; LVW060; TM40VD walk; Modern 300-5.

NABTESCO TRAVEL SERIES:
M2X63; M2X96 (EX200-2); M2X120; M2X146 (EX200-5); M2X150/170 (EX400); M2X210 (EX270/280/300); M5X130 (CAT320C); M5X180 (steel 350-8 god); MX150; MX173; MX500; MAG150; MAG170; LZV30; LZV120; LVW060; TM40VD walk; Modern 300-5.

REXROTH SERIES:
A4V40; A4V56; A4V71; A4V125; A4V250; A4VFO28; A4VSO40; A4VSO71; A4VSO125; A4VSO180; A4VSO250; A4VSO355; A4VSO500; A4VF500 / A4F500; A4VG28 (A4F571); A4VG40; A4VG45; A4VG50; A4VG56; A4VG71; A4VTG71; A4VG90 (32 A4VT90HW/r); A4VHW90; A4VTG90 fill oil pump (thick); A4VG125; A4VG125 pump; A4VG125 pump type (normal use); A4VG125 pump type A10VO28 (string); A4VG12 fill oil pump (giant); A4VG140; A4VG180; A4VG250; A10SO16/18; A10VSO28; A10VSO45; A10VSO45/52; A10VSO63/52; A10VSO63/53; A10VSO71; A10VSO85; A10VSO100; A10VSO140; A10VG18; A10VG28; A10VG45; A10VG63; A10V43 (double pump); A10V63; A10VD40 (double pump); A10VD43 (double pump); A10VE43; A10VEC60; A10VSF28; A11V040; A11VG35; A11VG50; A11VO60; A11VO75; A11VO95 (A11V95); A11V130; A11V145; A11V160; A11V190 (A11VLO190); A11VO200; A11VO250; A11VL0260.

REXROTH BEND AXIS SERIES:
A2F5;A2F12;A2F23;A2VK28;2VK28;A2F28;A2F55;A2F80;A2F107;A2F160;A2F200; A2V225;A2F250;A2V500;A2V915;A2F355;A2F500;A2F1000;A2FO10;A2FO12;A2FO16;A2FO23;A2FO28;A2FO32;A2FO45;A2FO56;A2FO63;A2FO80;A2FO90/A2FE90;A2FO107;A2FO125(A2FM125);A2FO160;A2FO180;A2FO200;A2FO250;A2FO500;A6V28;A7V55/A8V55;A7V58;A7V80/A8V80;A7V107/A8V107;A7V160/A8V160;A7V200;A7V225;A7V250;A7V355;A7V500;A6VM/A7V1000;A6VM/A7VO12;A7VO28;A7VO55;A7VO80;A7VO107;A7VO160;A6VM160;A6VE160;A6VM200;A6VM500;A7VO172;A7VO200;A7VO250;A7VO355;A7VO500.

REXROTH-UCHIDA SERIES:
1(REXROTH)A8VO55/A8VO80/A8VO80/6.3/A8VO107(SUMITOMO 280)/A8VO140/A8VO160/A8VO200
2(REXROTH)AP2D12( EPT 331MAIN PUMP)/AP2D16(CASE 35)/AP2D21/AP2D18(IHISCE 45 MAIN PUMP)/AP2D25(DH55 MAIN PUMP)/AP2D36/ZAX70 MAIN PUMP

SAUER SERIES:
PV20;PV21(PVD21);PV22;PVD22;PV23(PVD23);PV24;SPV6/119;PV25;PV26;PV112;OPV27;MF16A;MFO35;MF500;MPVO46/M46;MPR63;MPV45.

SAUER 90 SERIES:
PV90R30;PV90R42;PV90R55;PV90R75;PV90R100;BRL100;PV90R130;PV90R180;PV90R250;SPV14;SPV15;SPV18;MMF571C;MPT044;M44;HRR057.

EATON SERIES:
3321/3331 (Eaton, 006); Eaton 3322 (EATON3322); 4621/4621-007; 5421/5431 (Eaton 23); Keith 1460 (CASE1460); Keith CS05A; Eaton 3932-243; Eaton 6423; (Eaton 24-7620-7621); Roller (Eaton, 78462).

EATON-VICKERS SERIES:
PVE19;TA19;PVE21;PVH45;PVH57;PVH74;PVH81;PVH98;PVH106(HPN-1398);PVH131;PVH141;PVB5;PVB6;PVB10;PVB15(PVQ32);PVB20;PVB29;PVBQA29-SR;PVQ40/50;PVB110;TB35;B45.

TOKIWA SERIES:

MKV23/MKV33

TADANO SERIES:

(TADANO)100/150
HAWE SERIES :
V60A;V60A;V30D95;V30Z95;V30D140;V30D250
LINDE SERIES: 
HPV55T ; HPR75; HPR100; HPR105; HPR130; HMR135; HPR160; , 160; B2PV35; B2PV50 (BPR50); B2PV75 (BPR75); B2PV105 (BPR105); B2PV140; BPV35; BPV50; BPV70; BPV100; BMV75.27; BPR140; BPR186; BPR260; BMF50; BMF75; BMF105.
PARKER SERIES:
F11-005;F11-571;F11-571;F11-28;F11-39;F11-58;F12-060;F12-080/F12-090;F12-110-MF-1H;F11-150;F11-250;PVXS130;PVXS180;PVXS250;PVSO250;PV180;PV250;PLV250;PVM-018;PVM-571;BMHQ30/PV180;PAVC38;PAVC65;PAVC100;2145/P2145;23;PZ075;270/PV270;PVP76;PV29;PV74;PV0087;P76;PVG130 B;PSV600;PVT38;PVT38;PVT64;PK100;PMT14/18;P080;P2105;P2060;BZ732-100;SH5V/131.
YUKEN SERIES:
A16;A22;A37;A45;A56;A70;A90;A145
HARVESTER SERIES:
HPVMF23(T23C);HPVMF23.7;T28C;T30C;T37C

All these accessories are completely interchangeable with original, high quality and low price.

Our Company Service

1) We can help buyers design specific products or produce products according to buyers’design

2) We can print logo according to buyers’ requirement

3)We has exported to many countries,such as Korea, USA, German, etc.

 

Customer Service

1. You may email us through the Alibaba messaging system if you have a question

or would like to submit a comment.

2. Generally, email will be responded to within 24 hours; except on every Sunday

and holidays. We will reply as soon as we back in office.

2. We will send you tracking information to the e-mail address you have registered with Alibaba.

3. If you don’t see what you are looking for, just send us an e-mail with picture/picture

and we will be glad to help you.

4. Positive feedback is very important to us.

 

Packaging & Shipping
Delivery Details

Delivery time depends on the destination and other factors, it may up to 7 work days.

In order to ensure you receive you order tax free upon import, we will declare it as a “Sample”with a lower value.This lower price does not reflect the total price you paid.

After we ship the goods, we will email you the shipping information, as well as tracking number.

 

FAQ
Questions you maybe inquiry

Q1:Could you custom products?

We can manufacture it according to your drawings or samples.

Q2: I want to buy your products, how can I pay?

A :You can pay via T/T , WEST UNION or other payment terms we reach agreement.

Q3: How can you guarantee the quality?

A: One year’s warranty against B/L date.

If You meet with quality problem, we promise to responsible for it.

Q4: If we don’t find what we want on your website, what should we do?

A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.

Q5: Can we buy 1 pc of each item for quality testing?

A: Yes, we understand quality test is important and we are glad to send 1pc for quality testing.

Q6: What is the lead time?

A: For this product, normally 3 days,3 days and lead time is calculated from the day we receive your deposit.

Exact time is determined by factory schedule.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Hitachi China in Bhavnagar India face gear coupling supplier Hydraulic in Salem India falk 1015g20 supplier Spare Parts for Hpv118 Used in Construction Machinery with top quality lowest price

RV China in Zaporizhzhya Ukraine maina coupling Series in Belfast United Kingdom helical coupling factory High Quality Worm Gear Box Speed Reducer with top quality lowest price

RV China in Zaporizhzhya Ukraine maina coupling Series in Belfast United Kingdom helical coupling factory High Quality Worm Gear Box Speed Reducer with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

SINGEL STEP WORM GEAR REDUCER

The reducer which model is 25~90 made of Aluminum alloy die-casting box,good looking in appearance,compact in structure,rust proofing on surface and small volume to save mounting space.
The reducer model of 110~150 is made of cast iron which casted with Aluminum mould.It`s good looking and solid, and can be used through the setting of multi-azimuth.
Good radiating characterstic leads safe and reliability,and high efficiency for using.
The EPT capacity of loading ensure stable transmission,make less vibration and noise.
Varies of connecting structure for power input and torque output meet different require-merits;
the design of box outline and the set of foot hole with good versality is apt to many kinds of mounting.

APPLICATION
Agriculture, Air Movement Products, Chemical, Construction, Crane & Hoist, Crusher, Drill Rig Duty, Elevators / Escalators, Food and Beverage, Forestry, Healthcare, Irrigation Systems, Manufacturing, Marine, Material Handling, Medical Equipment, Metal Processing, Mining, Oil and Gas, Packaging, Paper Processing, Petrochemical, Pharmaceutical, Plastics, Port Machinery, Pulp and Paper, Pump, Rail Duty, Refinery & Petrochemical, Rock Crusher, Solar, Steel, Sugar & Ethanol, Textiles, Wind Energy
Applications
Conveyors, Cranes and Hoists, Elevators, Escalators, Fans, Gates, Irrigators, Machinery, Mixers, Packaging Equipment, Pools, Specialty Trucks and Vehicles, Wind Turbines, X-Ray Equipment, Airports, Boats and Yachts, Energy Installations (Deserts, Wind Farms), Foundries, Off-shore Oil Rigs, Mining Sites, Factories, Supermarkets, Refineries, Ports, Railways, Farms.

PRODUCTION
Our worm gear speed reducer, helical gear speed reducer, worm helical gear speed reducer, speed variator, cycle-drive gearboxes, couplings, door/gate operators and so on are high quality and welcomed by our customers. We supply both standard goods and also can produce as per your drawing. Your detail enquiry will be high appreciated.
Our Worm gearbox reducer has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11. Parallel axis-bevel wheel speed-down motor.
 

Type Worm Gear Speed Reducer Gearbox
Model NMRV571-150
Ratio 5,7.5,10,15,20,25,30,40,50,60,80,100
Color Blue / Silver or OEM colors
Material Housing-Casting iron-HT200# / Aluminium
Worm Gear KK alloy
Worm 20CrMnTi with carburizing and quenching, surface hardness is 58-62HRC
Shaft chromium steel-45#
Bearing Brand “HRE”,”C&U” Bearing
Seal NAK or SKF
Input Power 0.06-15KW
Usages In industrial machine: Food stuff,Ceramics,chemical, aswell as packing, printing,  dyeing,woodworking, glass and plastics..
IEC Flange 56B5,63B5,80B5,90B5,100B5,112B5,132B5….
Lubricant BODA Synthetic oil(RV030-90),G-N460W Mineral oil(RV110-150)

SPEC AND PARAMETER

Center Distance
A		 Motor Flaange UA The Hole Diameter fo Shaft
PAM IEC N M P I Transmission Ratio
5 7.5 10 15 20 25 30 40 50 60 80 100
NMRV571 56B14 50 65 80 9 9 9 9 9 9 9 9 9 9 – –
NMRV030 63B5 95 115 140 11 11 11 11 11 11 11 11 11 – – –
63B14 60 75 90 11 11 11 11 11 11 11 11 11 – – –
56B5 80 100 120 9 9 9 9 9 9 9 9 9 9 9 –
56B14 50 65 80 9 9 9 9 9 9 9 9 9 9 9 –
NMRV040 71B5 110 130 160 14- 14 14 14 14 14 14 14 – – – –
71B14 70 85 105 14 14 14 14 14 14 14 14 – – – –
63B5 95 115 140 11 11 11 11 11 11 11 11 11 11 11 11
63B14 60 75 90 11 11 11 11 11 11 11 11 11 11 11 11
56B5 80 100 120 – – – – – – – – 9 9 9 9
NMRV050 80B5 130 165 200 19 19 19 19 19 19 19 – – – – –
80B14 80 100 120 19 19 19 19 19 19 19 – – – – –
71B5 110 130 160 14 14 14 14 14 14 14 14 14 14 14 –
71B14 70 85 105 14 14 14 14 14 14 14 14 14 14 14 –
63B5 95 115 140 – – – – – – – 11 11 11 11 11
NMRV063 90B5 130 165 200 24 24 24 24 24 24 24 – – – – –
90B14 95 115 140 24 24 24 24 24 24 24 – – – – –
80B5 130 165 200 19 19 19 19 19 19 19 19 19 19 – –
80B14 80 100 120 19 19 19 19 19 19 19 19 19 19 – –
71B5 110 130 160 – – – – – – – 14 14 14 14 14
71B14 70 85 105 – – – – – – – 14   14 14 14
NMRV075 100/112B5 180 215 250 — 28 28 28 – – – – – – – –
100/112B14 110 130 160 – 28 28 28 – – – – – – – –
90B5 130 165 200 – 24 24 24 24 24 24 24 – – – –
90B14 95 115 140 – 24 24 24 24 24 24 24 – – – –
80B5 130 165 200 – – – – 19 19 19 19 19 19 19 19
80B14 80 100 120 – – – – 19 19 19 19 19 19 19 19
71B5 110 130 160 – – – – – – – 14 14 14 14 14
NMRV090 100/112B5 180 215 250 – 28 28 28 28 28 28 –   – – –
100/112B14 110 130 160 – 28 28 28 28 28 28 – – – – –
90B5 130 165 200 – 24 24 24 24 24 24 24 24 24 – –
90B14 95 115 140 – 24 24 24 24 24 24 24 24 24 – –
80B5 130 165 200 – – – – – – – 19 19 19 19 19
80B14 80 100 120 – – – – – – – 19 19 19 19 19
NMRV110 132B5 230 265 300 – 38 38 38 38 – – – – – – –
132B14 130 165 200 – 38 38 38 38 – – – – – – –
100/112B5 180 215 250 – 28 28 28 28 28 28 28 28 28 – –
90B5 130 165 200 – – – – – 24 24 24 24 24 24 24
90B14 95 115 140 – – – – – 24 24 24 24 24 24 24
80B5 130 165 200 – – – – – – – – – – 19 19
NMRV130 132B5 230 265 300 – 38 38 38 38 38 38 38 – – – –
132B14 130 165 200 – 38 38 38 38 38 38 38 – – – –
100/112B5 180 215 250 – – – – – 28 28 28 28 28 28 28
90B5 130 165 200 – – – – – – – – – – 24 24
90B14 95 115 140 – – – – – – – – – – 24 24
NMRV150 160B5 250 300 350 – 42 42 42 42 42 – – – – – –
132B5 230 265 300 – – – – 38 38 38 38 38 – – –
132B14 130 165 200 – – – – 38 38 38 38 38 – – –
100/112B5 180 215 250 – – – – – – – – 28 28 28 28

COMMODITY DISPLAY

PRODUCT STRUCTURER

COMPANY PROFILE


PACKAGING & SHIPPING
Packing: Wooden Box/Wooden Pallet
Shipping: 7-15 days upon receipt of deposit. By Sea/By Air/By Courier
Package can be made as per customer’s request

WHY CHOOSE OUR HENKOOLEE?
1. A leading factory of diamond tools industry in China
2. Approved the best quality with very competitive price
3. Good sharpness, stable performance, high cutting efficiency and long lifespan
4. Strict quality control system, accept inspection by 3rd party, as ISO9001, ISO14001 and OHSAS18001 systems.
5. We have very experienced R&D engineers and we have EPT ability to do ODM projects.
6. Custom design can be meet upon request, small trial order is available in any time, We offer OEM services. Can print your own logo on product , can customize the retail box packing and other things.
7. Easy communication,HENKOOLEE professional sales team will always answer you in time, besides, friendly and helpful after sales service is always there for you.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

RV China in Zaporizhzhya Ukraine maina coupling Series in Belfast United Kingdom helical coupling factory High Quality Worm Gear Box Speed Reducer with top quality lowest price

Factory China in Campo Grande Brazil gear coupling 102 shop Price in Kanpur India gear coupling manufacturers supplier Carbon Steel Large Diameter Forged Spiral Internal Tooth Gear with top quality lowest price

Factory China in Campo Grande Brazil gear coupling 102 shop Price in Kanpur India gear coupling manufacturers supplier Carbon Steel Large Diameter Forged Spiral Internal Tooth Gear with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Accept drawing and sample custom

Quick Details

Material Carbon Steel, Stainless Steel, Copper, Brass or as You Required
Processing Forging , Casting or Welding
Heat Treatment High Frenquency Quenching and Hard Teeth
Surface Treatment Blacken or Galvanized as You Required
Standard GB1244-85, DIN8187,8188, OEM, ANSI or DIN
Payment T / T  L/C

Supply Ability
Supply Ability: 6000 Piece/Pieces per Month

Packaging & Delivery
Packaging Details
Standard package:  
1.Inner Plastic Bag,Carton Box and Wooden Case   
2.Or Customer’s requirement
Port
ZheJiang , China
Lead Time :

Quantity(Pieces) 1 – 10000 >10000
Est. Time(days) 10 To be negotiated

Our Advantage 
—We have over 20 years ODM &OEM experience
—100% to test before shippment goods
—24Hours for services ,Any questions, we will face it together
—Use the best material for product ,each year, our OEM team will design new items according to the market need

Workshop

Other products

 About us
HangZhou EPT GEAR Co., Ltd. With a history of more than 20 years, is specialized in producing sprocket, gear, coupling, taper bush and other transmission products. 

The company was founded in 1993 and currently employs more than 100 people. It covers an area of 18, 000 square meters, with more than 250 sets of various kinds of metal processing equipment, including 90 sets of CNC equipment. 

We adopt the following standard to produce our products: ISO 606; ANSIB 29.1; DIN 1801; GB 124-97. 

Our products are exported to more than 60 countries and regions, including U. S. A, Japan, Germany, Italy, Argentina, South Africa. 

Sprocket is our main items for exporting. We can supply you various kinds of sprocket, Pitch size from 1/4″ to 4″ and teeth No. From 8 to 150. 

We always offer our customers competitive price, excellent quality and prompt delivery. We always consider customer’ S requirements first. Our aim is: “Customer’ S satisfaction is our pursuit”. 

We sincerely hope to set up long-term business relations with every custom on the basis mutual benefits and friendship.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Factory China in Campo Grande Brazil gear coupling 102 shop Price in Kanpur India gear coupling manufacturers supplier Carbon Steel Large Diameter Forged Spiral Internal Tooth Gear with top quality lowest price

Siemens China in Taibei China, Taiwan Province of China dodge gear coupling supplier Simogear in Samarinda Indonesia helical shaft coupling manufacturer Bevel Helical Gear Motors with top quality lowest price

Siemens China in Taibei China, Taiwan Province of China dodge gear coupling supplier Simogear in Samarinda Indonesia helical shaft coupling manufacturer Bevel Helical Gear Motors with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Introduction 
Bevel helical gear units are part of the SIMOGEAR modular system which essentially comprises bevel helical, parallel shaft, worm gear units or mechanically variable speed drives. With three or single phase AC motors with or without brake, all imaginable drive combinations up to electronic speed variable drives are possible 

Bevel helical gear units are designed for continuous duty under the most arduous operating conditions.

The sturdy gear housings are manufactured of high grade cast-iron and dampen vibrations.

Lubricant loss and entry of dust and water are effectively pre- vented by radial shaft seals with dust and protective lips.

The gears of the helical stages are hobbed, case hardened and profile ground or honed. Furthermore, gear theeth are profile corrected and crow- ned for optimum performance.

The bevel stage for the standard program is hobbed, case hardened and lapped.

The achieved precision allows higher torque respectively smaller units. Helical gearing provides for quiet operation. The design principle to install the bevel stage between two helical stages helps to decrease noise too, above all for higher speeds. 

The output and input shafts are in right-angle position. 

Design Variations

The standard unit is available for use in all mounting positions. 

The gear boxes are manufactured as solid shaft gear boxes or as hollow shaft gear boxes with tted key, shrink disc or splined shaft connections.

Recessing shafts, which t in the hollow shafts on the non preference series, are to be made from a higher strength material,like 42CrMo4, 16MnCr5 or similar. 

Data required for selection 
The following data is required in order to select the correct gearbox:

1. Type of driven machine
2. Daily operating time h
3. Required input power kW or required torque Nm
4. Required output speed n 2 of the geared motor rpm or gearbox ratio i
5. Operating voltage V and frequency Hz
6. Operating mode, number of startings, inverter-fed operation, type of startup
7. Moment of inertia J Load kgm2 of the driving machine reduced to the motor shaft
8. Type of power transmission on gearbox shafts (direct, coupling, belt, chain, gear wheel)
9. Radial force F r N at the input shaft and direction of force with distance from the shaft shoulder to the point of application and axial forceFax: 0086-571-88220971 [N] with direction of force
10. Ambient temperature oC
11. Degree of protection
12. Mounting position
13. Required braking torque Nm
14. Any regulations (CSA, VIK, etc.) 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Siemens China in Taibei China, Taiwan Province of China dodge gear coupling supplier Simogear in Samarinda Indonesia helical shaft coupling manufacturer Bevel Helical Gear Motors with top quality lowest price

Xiaohu China in Abeokuta Nigeria teflon gear coupling price Back in Ankara Turkey bowex m42 coupling price Gear for Construction Hoist with top quality lowest price

Xiaohu China in Abeokuta Nigeria teflon gear coupling price Back in Ankara Turkey bowex m42 coupling price Gear for Construction Hoist with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Construction Hoist Parts Xihu (West Lake) Dis. Roller Mast Section Roller
High quality construction hoist spare parts 
High quality GJJ, BAODA material hoist spare parts
 Packaging & Delivery

 

Packaging Details: wooden case
Delivery Detail: about 7-15 days after receiving T/T payment
 

All kinds of hoist spare parts , GJJ,BAODA,ZOOMLION,TIGER,
Driving device with 2-motors / 3-motors;
motor: 11kw, 14.5kw,18kw;
motor spare parts: braking system; brake sheet, motor adjustor, electromagnet,motor fan.
safety device: 30KN,40KN,50KN,60KN;
gearbox: 16:1,14:1,12:1;10:1;
coupling with rubber;
master rollers for 76 tube and 89 tube;
gear rack M8 40x60x1508mm;
gear pinion: M8,15teeth;
limit switch;
gate rollers;
counter rollers;
transformer;
Overload protect system;
cable: 3×16+2×6, 3×16+2×10

Product Description

Name Description
Brand  STRONG
Color As your requirement
Material  NBR, SILICONE, VITON, HNBR, CR, PTFE, EPDM, etc. Can choose on your requirement.
Feature Hot sale 
Packing Wooden case
Delivery 7-15days after receiving T/T payment
Port ZheJiang
Stock rich
OEM and ODM welcome

All kinds of hoist spare parts , GJJ,BAODA,ZOOMLION,TIGER,
Driving device with 2-motors / 3-motors;
motor: 11kw, 14.5kw,18kw;
motor spare parts: braking system; brake sheet, motor adjustor, electromagnet,motor fan.
safety device: 30KN,40KN,50KN,60KN;
gearbox: 16:1,14:1,12:1;10:1;
coupling with rubber;
master rollers for 76 tube and 89 tube;
gear rack M8 40x60x1508mm;
gear pinion: M8,15teeth;
limit switch;
gate rollers;
counter rollers;
transformer;
Overload protect system;
cable: 3×16+2×6, 3×16+2×10

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Xiaohu China in Abeokuta Nigeria teflon gear coupling price Back in Ankara Turkey bowex m42 coupling price Gear for Construction Hoist with top quality lowest price

Best China in Bologna Italy falk 1015g20 shop Minature in Kitwe Zambia drum gear coupling sales Linear Actuators, Micro Leveling Jacks, Mini Screw Thread Lift Manufacturer with top quality lowest price

Best China in Bologna Italy falk 1015g20 shop Minature in Kitwe Zambia drum gear coupling sales Linear Actuators, Micro Leveling Jacks, Mini Screw Thread Lift Manufacturer with top quality lowest price

We – EPG Team the biggest couplings and gears manufacturing facility in China with five diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

We are the ideal minature linear actuators, micro leveling jacks, mini screw thread lift manufacturer and supplier in China. Go to https:// /item/five hundred-lbs-ability-worm-equipment-mini-equipment-screw-jack.html to discover much more about minature linear actuators, micro leveling jacks, mini screw thread raise.

Features
1. Upright or inverted installation with greatest static load ability 2.five kN (250 kg)
two. Self-locking machine screw with no want brake or lock mechanisms to maintain placement. 
3. Equipment screw diameter 14mm, pitch 4mm (solitary start off acme thread).
four. Available in five:1 and twenty:one ratios.
five. Customise vacation length, max. 1500mm with rigidity load. 
six. Translating screw (travelling screw jack), keyed screw for anti-rotation (keyed screw jack), and rotating screw (travelling nut screw jack) as the normal configurations.
seven. Mini handbook screw jack with 125mm diameter handwheel. Option mini EPT screw jack with small motor, but can not immediately coupled with motor flange, ONLY connection by coupling for foot mounted.
8. Separately mini screw jack use, or mini screw jack lift system, joined by couplings, connecting shafts, mini bevel gearboxes with 1:one ratio.

Buildings and Components
1. Lifting screw substance – C45 metal
2. Worm (input shaft) content – C45 steel
3. Worm gear material – bronze
4. Housing (gearbox) content – ductile iron, or aluminum
five. Traveling nut – bronze  

Specs
The mini screw jack specifications consist of highest load capability, worm screw diameter and pitch, worm equipment ratio, allowable maximum input energy, torque and pace and all round effectiveness and so on. 

1. Problems: 20% running time/60 minutes or thirty% working time/10 minutes, twenty °C ambient temperature. Maximum allowable input electrical power .18kw, when your selection is EPT the optimum input power, the operational restrictions owing to thermal boundaries. you will want to decide on the greater dimensions screw jacks in get to let powerful heat dissipation. 
two. H=higher ratio five:1 (.8mm stroke for one particular input flip), L=slow ratio 20:one (.2mm stroke for a single enter flip).
3. Nm=enter torque needed, kW=input energy essential. 
4. Choice of mini screw jack using previously mentioned figures must only be carried out in consultation with Jacton engineers.

Assembly Drawings
Discover out mini screw jack front see, aspect view and top look at assembly drawings. About 2d Autocad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings, you should make contact with us directly.

Cargo and Packing Pictures 
Delivery:
one. EPT freight: seaport to seaport, price phrases CIF, FOB, EXW, CFR and many others.
two. Air freight: airport to airport, cost terms EXW, CRF and many others.
3. Air courier: DHL, FEDEX, UPS, TNT doorway to doorway cargo, price tag conditions DDU, CPT and so on.
Packing: 
100% regular exporting plywood circumstances. 
Observe: International Exporting Regular Wood Material with Free Fumigation.

JACTON Rewards
one. International normal materials for All JACTON manufacturer items. We insist on deciding on manufacturer suppliers to supply the high good quality uncooked supplies to control the making approach. Optimization continuously the production processes, inspecting in each and every hyperlink and taking care of generation internet site.
two. one hundred% good quality certain with double good quality inspections. The high quality inspection by good quality inspectors from processing to completed merchandise as the 1st time. Before packing, the corresponding revenue engineers should examine the orders following the paper drawings, purchase portions and special markings in the bill or sales contracts as the next time. Following that, fill in the inspection report with signature and firm stamp.
three. 100% protection transportation. Packing with EPT regular export plywood instances components (free fumigation), inner packing with epe foams to stop merchandise swaying and outer packing with iron sheets and fasteners to fasten the packages.
4. Internationl income engineers have skilled expertise and skills on our common goods and service. They have ample capability to solve the basic technical difficulty immediately whatsoever by mobile phone, online chat, confront to face communications.
5. All the regular merchandise with 2d CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Versions (Stage, STP, Model, IGS, PRT and CATParT formats).
six. Customized design and style obtainable, OEM service accessible, Free engineering guidance, Free rates accessible and Buyer label accessible.
7. Inspection equipments incorporate motor with inverter travel technique, height adjustmemt motorized lifting method, coordinate measuring devices, exterior micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, electronic noise meters, industrial infrared thermometers, electronic velocity measuring instruments, electronic multimeters, and higher precision clamp electronic ammeter and so on. 
eight. Processing with modern advanced devices these kinds of as CNC equipment hobbing devices, CNC flank grinding devices, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and other folks equipments.

Completed Initiatives
1. Theatrical remedies stage and orchestra platform lifts projects. Buyers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 
2. Hydro EPT electrical power station initiatives and h2o conservancy tasks. Customers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom. 
3. Aircraft servicing platforms and docking systems assignments. Buyers are from Pakistan, Singapore and United Arab Emirates.  
4. Photo voltaic panel tracking system projects. Customers are from Spain, India and Canada. 
five. Bolted metal storage tanks and silos lifting remedies. Consumers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam. 
six. Dish antenna elevation and azimuth positioning tasks. Customers are from Singapore, Malaysia and United States. 
seven. Railway wagon assignments. Clients are from South Africa. 
8. Beverage can production traces. Consumers are from Netherlands, United States, Thailand and Indonesia. 
nine. Steel factories manufacturing strains. Buyers are from Iran, United States and Turkey. 
10. Continuous PU sandwich panel generation lines. Buyers are from Thailand and United Kingdom.  

JACTON Clients Regions(Nations around the world)
1. American Nations around the world: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.by way of, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
two. European Nations: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Ga, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
three. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
four. Oceanian Nations around the world: Australia, New Zealand, Fiji.
five. African Nations around the world: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

JACTON Items Checklist
one. Manual Screw Jacks, EPT Screw Jacks.
two. Screw Jacks Series: JT sequence acme screw jacks, JTC collection cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB collection ball screw jacks, JTD collection cubic ball screw jacks, JSS sequence stainless steel screw jacks, JTS collection bevel equipment screw jacks, Non-standard collection screw jacks. 
three. Bevel Gearboxes Series: JT collection bevel gearboxes, JTP sequence cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH sequence hollow shaft bevel gearboxes, BSS collection stainless steel bevel gearboxes.  
4. Lifting Techniques and Programs Equipment: two-jacks programs, a few-jacks systems, four-jacks techniques, six-jacks systems, eight-jacks systems. Components cover couplings, common joints, cardan shafts, connecting shafts, EPT motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod stop bearings, cease nuts, limit switches, security nut, vacation nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protecting tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and placement indicators etc.
five.  EPT Linear Actuators Series: Parallel heavy obligation linear actuators, In-line hefty obligation linear actuators.
six. Geared Motors and Pace Reducers Sequence: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, modest AC gear motor sequence and worm equipment motor reducer series.

Contact Information
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Funds 500000CNY) is a leading producer and supplier of  Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Techniques, EPT Linear Actuators, Gearmotors and Velocity Reducers, and Other folks Linear Movement and Electrical power Transmission Items in China.  We are Alibaba, Produced-In-China and SGS (Serial NO.: QIP-ASI192186) audited company and supplier. We also have a strict good quality method, with senior engineers, experienced skilled personnel and practiced revenue groups, we persistently offer the high high quality equipments to fulfill the clients electro-mechanical actuation, lifting and positioning needs. JACTON Market guarantees high quality, trustworthiness, efficiency and benefit for present-day demanding industrial purposes.
Internet site (English): 
Internet site (English): 
Website (Chinese):  /wp-material/uploads/2019/10/QzpcVXNlcnNcQWRtaW5pc3RyYXRvclxBcHBEYXRhXFJvYW1pbmdcRGluZ1RhbGtcMjQxNTc4Nzk5X3YyXEltYWdlRmlsZXNcMTA4MTAzMjdcMTg1NjAzMDcxMl85MjY3ODM0NTc3X2VwLWNvbnRhY3RzLmpwZw.jpg” alt=”Ideal China in Bologna Italy falk 1015g20 store Minature in Kitwe Zambia drum gear coupling sales Linear Actuators, Micro Leveling Jacks, Mini Screw Thread Elevate Company with best good quality lowest cost” >

Rubber China in Gebze Turkey falk 1040g20 near me R26 in Antipolo Philippines flexocon gear coupling Slurry Pump for Mining with top quality lowest price

Rubber China in Gebze Turkey falk 1040g20 near me R26 in Antipolo Philippines flexocon gear coupling Slurry Pump for Mining with top quality lowest price

We – EPG Team the largest couplings and gears factory in China with 5 distinct branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Rubber R26 Slurry Pump for Mining

Solution Show

Solution Description :

AH Collection Slurry Pumps Overview

Size selection (outlet)

1″to 18″(25mm to 450mm)

Potential

up to 22,000gpm(5,000m3/hr)

Head 

up to 240ft (73m)

Pressure 

up to 300psi(2,571KPa)

  EPT BRAND Type of AH series centrifugal slurry pumps are cantilevered,horizontal,slurry pumps.

1. They are made for the handling highly abrasive, large density slurry in the metallurgical, mining, coal, electricity, constructing content and other industrial departments and so on.

two. The pumps of this sort also can be installed in multistage sequence.

three. The body plates for kind NH centrifugal slurry pumps have replaceable use-resistant

     metal liners or rubber liners.

4. The impellers are produced of dress in resistant chrome alloy or rubber.

5. The frame plate liner and impeller for HH pump are adoptable of use-resistant metallic only .

6. The shaft seals for type NH centrifugal slurry pumps can be adoptable of gland seal or expeller seal.

seven. This Collection of Pumps are used conveying abrasive or corrosive slurry, particularly c EPT of energy plants in EPT power, metallurgy, mining, coal, creating materials, chemical market and other industrial sectors,etc.

Product Application

Organization Profile

Testing Tools

Packaging & Shipping

/ The use of original gear manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our firm and the shown EPT parts contained herein are not sponsored, approved, or created by the OEM. /

Rubber China in Gebze Turkey falk 1040g20 near me R26 in Antipolo Philippines flexocon gear coupling Slurry Pump for Mining with top quality lowest price

Ce China in Medina Saudi Arabia gear tooth coupling shop Biomass in Lyon France drum gear coupling factory Wood Pellet Manufacturing Equipment with top quality lowest price

Ce China in Medina Saudi Arabia gear tooth coupling shop Biomass in Lyon France drum gear coupling factory Wood Pellet Manufacturing Equipment with top quality lowest price

We – EPG Team the biggest couplings and gears manufacturing facility in China with five diverse branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

CE biomass wooden pellet producing equipment 

TF Manufacturing unit Introduction: 
HangZhou Tongfu Machinery Co.,Ltd is a huge-scale new vitality products producers in China.
Our primary goods are pellet mill for energy industry, feed-stuff industry and we are dealing with Development Waste Crushing and Recycling Operate station.
1)Years of knowledge in pellet equipment creation field.
two)Approved ISO9001 and worldwide certificate: CE and SGS.
3)Manufacturing unit audited by SGS.
4)Over 100 stuff and 50,000sm manufacturing facility occupation.
5)Specialized in planning, studying, creating, production and exporting.
six)Exported to above 20 nations and completed a lot more than 100 change-important assignments.

TF Support
 Reply your inquiry within 24 working hours. 
 Experienced staffs answer all your question in professional and fluent English. 
 Customized design is available.
 Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers.
 
   
Features of Wooden Pelletizer Tools
1.It is broadly employed for pelletizing all kinds of biomass particles, this kind of as wooden sawdust, straw, rice husk and espresso husk and so on.
2.The major push adopts the higher precision equipment driving, so the output is 20% much more than the belt generate.
three.It employs the imported substantial top quality bearings, oil seal to make confident the high-effectiveness, secure efficiency and minimal noisy of the entire equipment.
four.The feeder employs variable-frequency and variable-speed motor to make confident the good top quality of the pellet.
five.Innovative world common compensatory S-formed coupling with the composition of novel, compact, safe, low-noisy and minimal fault.
6.Feeder, conditioner and chute are manufactured of stainless steel with extended services existence.
7.It is with magnet and more than load security technique, which can shield device nicely in the course of creation
8.We have various bore diameter of the ring dies for your option. And the feeder is with a variable speed managed to meet different outputs specifications.
9.We have oversized conditioner and jacked conditioner for choosing to increase the effect of the pellet condition.

Software of Wood Pelletizer Tools
This pellet machine largely used for making wooden pellets , the pellets used for industry, boiler factories.

Various kinds of raw material to make pellet: Uncooked material can be any kind of Agro-Forestry squander,like wooden log,wooden branch,wooden pores and skin,wood chips,stalk,straw,peanut shell,rice husk,etc.
agricultural squander(wheat stalk,corn stalk,peanut shell,rice husk,straw,and so on.) and wood waste(scobs,wood branch,wooden chips,wood shaving,log’s pores and skin,and so on.)

Output pellet:
the ultimate dimension could be:Φ6, 8, ten, 12mm, etc. length is adjustable,strictly comply with EU Standard.

Technical specs of Wood Pelletizer Tools

Sort Vertical
Product MZLV
480		 MZLV
480		 MZLV
560		 MZLV
560		 MZLV
560		 MZLV
seven-hundred
Electricity(KW) 55 seventy five 90 one hundred ten 132 one hundred sixty
Capability(T/H) .5-.six .nine-one 1-1.two 1.5-one.eight 2-two.five two.5-three
Ring Die(mm) 480 480 560 560 560 seven-hundred
Remark 2 layer ring die.
We have 560R(Reducer kind).560G(Equipment sort)

Framework Description of Wood Pelletizer Equipment
1.Upward mould. Vertically feeding, by no means buff placer, and simpler heat dissipation
2. Mold vertical, equipment is easier fixing, and steady managing
three.Urgent wheel rotates, and makes materials centrifugal, evenly distribute
4. Double mold, higher and underneath double-use, decreases the expense and enhance the performance
five.Cooling program, tends to make approach area get adequate cooling, which offers defense to machine’s prolonged-expression stable operation.

We also create Total Wood Pellet Production Line Mostly consists of: 
1.Crushing procedure – Hammer mill
2.Drying approach – Wooden Sawdust rotary dryer
3.Pelletizing procedure – wood Sawdust pellet mill
4.Cooling procedure – Pellet cooling machine
five.Packing method – Pellet packing equipment

Packing&Shipping of Wood Pelletizer Gear
1).Wooden or metal case according to specific size of each Wood Pellet Creating Machine
   we twine thick plastic coating for each  Wooden Pellet Producing Machine.
2).Tight the equipment in the truck without space to ensure no rubbing during the transportation.
 
FAQ
1) what about the dimensions of the closing wooden pellet merchandise? 
 the dimension is adjustable in accordance to your necessity.
 the diameter selection of the wooden pellet is ø6-ten mm by utilizing different ring die mould. 
 the duration of the wooden pellet could be modified on the machine.
 2) What is the suited dampness (water articles) of the uncooked material that straightforward to make pellet?
 the perfect dampness selection is from 15%  to eighteen% . 
 3) will you dispatch engineer to set up the wood pellet device (production line)? 
 Yes. we will dispatch engineer to do the service just dependent on the requirement of customers. 

To provide you ideal suggestion and comprehensive quotation, remember to let us know:

1. What is the capability you want?
2. What is the uncooked material?
3. What is the size of the raw substance?
four. What is the humidity content material?
5. What is the ultimate pellet dimensions do you want?

 
 Please make contact with us freely to get a lot more info about the solution.
world wide web:

/ The use of unique products manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the outlined EPT elements contained herein are not sponsored, accepted, or manufactured by the OEM. /

Ce China in Medina Saudi Arabia gear tooth coupling shop Biomass in Lyon France drum gear coupling factory Wood Pellet Manufacturing Equipment with top quality lowest price

20000psi China in Cuttack India maina gear coupling Riad in Charlotte United States gearflex coupling supplier Mark Remove Double Gun Water Jet Blasting Cleaning Machine with top quality lowest price

20000psi China in Cuttack India maina gear coupling Riad in Charlotte United States gearflex coupling supplier Mark Remove Double Gun Water Jet Blasting Cleaning Machine with top quality lowest price

We – EPG Group the greatest couplings and gears manufacturing unit in China with 5 various branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Device identify:   20000psi riad mark take away Double Gun Water Jet Blasting Cleansing Machine  

 

one. Merchandise DESCRIPTION 
Machine type: water blasting machine
Application: road marking get rid of
Machine design: WHY30571
Max Working force:  20000PSI
Flow rate: 60Lpm
Medium:New drinking water,soda ash ,oil.ect
Certification: ISO9001:2008 , CE
Pump fluid finish material:substantial good quality stainless metal
Mounted sort: Skid mounted or as require
Protecting include: Container entire cover as call for

WHY30000 Technological PARAMETER 

Product DIAMETER  FLOW  Motor Energy (KW)  D r.p.m
  (mm) L/M 160KW  200 KW 240 KW 288 KW    
      Operating Stress (BAR) 1500 366
WHY30018 eighteen 34 2400 27000     1500 366
WHY3571 twenty 41 1900 2400 2700   1500 366
WHY30571 22 fifty 1600 2000 2500 2800 1500 366
WHY30571 24 sixty 1350 1700 2100 2500 1500 366

D=Piston/Plunger. dia. [mm]              n1=Motor/Motor r.p.m.            n2=Crankshaft r.p.m
N2 Plunger velocity:.73m/s                Rod pressure:105KN                      Stroke:120mm
1kW=1.34HP                                     Op.stress 1bar=14.5psi=.1Mpa  1GPM=3.78L/M

STHangZhouRD Attributes

*High force pump (Max doing work strain: 0000PSI) 
* EPT motor
*Handle box( Incl pump protecting program)
*Flexible coupling
*Coupling protecting cover
*Double filter tank  (Stainless steel as demand)
*Basic safety valve
*Stress regulating valve
*Strain gauge EX
*High strain hose
*Skid mounted foundation
*Drinking water inlet Booster pump and piping technique

We are foremost maker of higher pressure cleaner/drinking water jet cleaner / substantial pressure pump, assist by over twenty five several years Ultra higher stress cleaner R&D group.

OPTIONAL Characteristics
*Stainless steel water tank
*Mobile Trolly
*Higher strain hose
*Hose reel
*Nozzles
*Foot manage valve
*H2o jetting resources
*Full protect equipment guarding container
*Engine Insulation kit
*H2o jet high stress cleaner Sounds reduction kit
*Other unique prerequisite of Buyer

two. Business INTRODUCTION
HangZhou Hong EPT Pump Production Co., Ltd. is a expert large stress pump maker and substantial strain cleaning equipment provider . Our goods strictly accord with JB/T8093-1999 common and have passed by means of ISO9001 good quality method.All products manufactured by the firm with a force security technique, oil temperature handle program, drinking water flow strain manage system, manage technique.We emphasis on globe top technological innovation, introduce the Germany technological innovation, and continuously improve the good quality system of our excellent goods such as cleansing products and so on. This lowers the production cost and enhances the function efficiency for users. According to buyer requirements, they can personalize goods or analysis and develop generation jointly.

3. Application

four. PACKING 

 

5. Transport

6. Consumer Check out

7.CERTIFICATION

8.FAQ

(one)Q : What ability of we can offer?

  A: we can as your needs to professional layout.

(2)Q : How several days can supply the merchandise ?

  A:The device and supply time is specially created device in accordance to your particular prerequisite.

(three)Q :What does your factory do regarding merchandise quality ?

  A: From the beginning to the conclude we have a special quality control personnel. Each machine is assembled and cautiously analyzed ahead of cargo.

(4)Q: How long is your supply time?

   A: It is according to the model and amount.Usually it is three-5 times if the equipment are in stock. It will be fifteen-thirty days if you want to customize the machines.

(5) Q: What is your conditions of payment?

   A: We acknowledge T/T, Western Union, Funds Gram, Paypal, Alibaba Escrow and so on.

       Payment<=USD 5000, 100% in advance.

       Payment>=USD 5000, 40% T/T in progress, stability ahead of shipment.

 

/ The use of original products manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our business and the detailed EPT components contained herein are not sponsored, approved, or made by the OEM. /

20000psi China in Cuttack India maina gear coupling Riad in Charlotte United States gearflex coupling supplier Mark Remove Double Gun Water Jet Blasting Cleaning Machine with top quality lowest price