Tag Archives: gear coupling price

Screw China in Port Elizabeth South Africa falk lifelign gear couplings manufacturer Jack in Gaoxiong China, Taiwan Province of China elecon coupling manufacturer Operation Manual, Handing of Accessories, Installation and Maintenance with top quality lowest price

Screw China in Port Elizabeth South Africa falk lifelign gear couplings manufacturer Jack in Gaoxiong China, Taiwan Province of China elecon coupling manufacturer Operation Manual, Handing of Accessories, Installation and Maintenance with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Screw jack operation manual, handing of accessories, Installation and Maintenance

Check the following matters before operation.
* Check lubricant: Check lubricant quantity.
* Check grease: Cheak grease of screw shaft
* Run-in operation: It is required to conduct run-in operation in order to perform full performance. Therefore, conduct run-in operation for 2-4 hours with 1/3-1/2 of rated load before starting.
* Caution on stroke:  The stroke can overrun up and down in both direction within 5-20 mm. When the stroke overrun more than above, screw shaft will be stopped at the place where the stopper to be mounted on the screw shaft bump the housing stopper. But don’t try to conduct any work when the product is energized. Always turn off the power switch supply to avoid the product damage. However, screw shaft is locked then you must take off cover of output shaft. We recommended you to use the safety device such as torque limiter and others. But excessive over load to stopper may cause the products damaged.

Handing of accessories
* With bellows: The standard bellow is made from nylon tarpaulin. Unit with bellow must use if jack operation in such bad environment as outdoor or area filled dust or cutting power.
* With key for whirl stop:  It is the structure that enables the screw shaft to move up and down by screw jack itself. The key is fixed to cover of output screw and the key way is in the screw shaft. After used for long period of time, its frictional force worm out, widening the gap between the break disks. When key way EPT a certain distance, excitation of the screw shaft dose no longer a ctivate its armatures, then replace parts.
* With motor: It is the type that the flange type motor is connected directly to the products by coupling. As it adopts the oil bath system in reducer part, it can move at high speed (confirm the attached instruction by motor maker)
* With bevel gear box: It is the type that the bevel gear box is connected directly to the product. As you can position input shaft at right angle to the standard input shaft direction, it is useful to connect many devices. Don’t add the over hung load on the input shaft of bevel gear side.

Installation
* Mounting base: Mounting surface must be rigid enough and secure a flat surface processed mechanically. Otherwise, vibration and noise will cause the jack damage. If mount the reducer, motor, align the product properly.
* Mounting bolt: For mounting bolt of jack, in case load force work on mounting bolt itself, use bolt of strength classification 10.9 or more.

Maintenance
* Change lubricant: For grease lubricant type, filled the grease through grease fitting. Excessive grease must removed from screw end cap cover. For oil bath type, after 50 hours of operation, change the lubricant for first time. After that, change every 6 months. Specially, for first time, unit must be drained, flushed wearing powder with light oil. 
* Change screw shaft grease: The lubricant for screw shaft is grease. Change it with new grease at earlier stage. (in about one week). Wipe off old grease and coat with new grease. In addition, it is recommendable to change the grease even if idle unit for long period (more than 6 months).
* Check wear of female screw: Check the wear of female screw. Standard of changing female screw is depend on loading rate and frequency. For normal case, change the screw when maximum screw backlash reached the 1/4 of screw pitch.
* Check worm gear: Check the gear of worm wheel whether if abnormal wear appears or damaged.
 

JTC Series Cubic Screw Jack

2.5 kN Cubic Mini Screw Jack (0.25T)
1. Maximum static load capacity 2.5kN
2. Lifting screw Tr 14×4
3. Gear ratios 5:1, 20:1
4. Custom made travel length
5. Translating, rotating screw design
6. Multiple mini screw jack systems
7. Hand wheel operated, motor driven
 		 5 kN Cubic Small Screw Jack (0.5T)
1. Maximum static load capacity 5kN
2. Lifting screw Tr 18×4
3. Gear ratios 5:1, 20:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven		 10 kN Cubic Screw Jack (1T)
1. Maximum static load capacity 10kN
2. Lifting screw Tr 20×4
3. Gear ratios 5:1, 20:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven
25 kN Cubic Screw Jack (2.5T)
1. Maximum static load capacity 25kN
2. Lifting screw Tr 30×6
3. Gear ratios 6:1, 24:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
6. Multiple units screw jack systems
7. Hand wheel operated, motor driven		 50 kN Cubic Screw Jack (5T)
1. Maximum static load capacity 50kN
2. Lifting screw Tr 40×7
3. Gear ratios 7:1, 28:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
6. Multiple units screw jack systems
7. Hand wheel operated, motor driven		 100 kN Cubic Screw Jack (10T)
1. Maximum static load capacity 100kN
2. Lifting screw Tr 55×9
3. Gear ratios 9:1, 36:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven
150 kN Cubic Screw Jack (15T)
1. Maximum static load capacity 150kN
2. Lifting screw Tr 60×9
3. Gear ratios 9:1, 36:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven		 200 kN Cubic Screw Jack (20T)
1. Maximum static load capacity 200kN
2. Lifting screw Tr 70×10
3. Gear ratios 10:1, 40:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven		 250 kN Cubic Screw Jack (25T)
1. Maximum static load capacity 250kN
2. Lifting screw Tr 80×10
3. Gear ratios 10:1, 40:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven
350 kN Cubic Screw Jack (35T)
1. Maximum static load capacity 350kN
2. Lifting screw Tr 100×10
3. Gear ratios 10:1, 40:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven		 500 kN Cubic Screw Jack (50T)
1. Maximum static load capacity 500kN
2. Lifting screw Tr 120×14
3. Gear ratios 14:1, 56:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
7. Multiple small screw jack systems
8. Hand wheel operated, motor driven

 

JTW Series Machine Screw Jack

1 Ton Machine Screw Jack (1T)
1. Maximum static load capacity 1 ton
2. Lifting screw Tr 24×4
3. Gear ratios 6:1, 12:1, 24:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated		 2.5 Ton Machine Screw Jack (2.5T)
1. Maximum static load capacity 2.5 ton
2. Lifting screw Tr 30×6
3. Gear ratios 6:1, 12:1, 24:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated		 5 Ton Machine Screw Jack (5T)
1. Maximum static load capacity 5 ton
2. Lifting screw Tr 40×7
3. Gear ratios 6:1, 12:1, 24:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated
10 Ton Machine Screw Jack (10T)
1. Maximum static load capacity 10 ton
2. Lifting screw Tr 58×12
3. Gear ratios 8:1, 12:1, 24:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated		 15 Ton Machine Screw Jack (15T)
1. Maximum static load capacity 15 ton
2. Lifting screw Tr 58×12
3. Gear ratios 8:1, 12:1, 24:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated		 20 Ton Machine Screw Jack (20T)
1. Maximum static load capacity 20 ton
2. Lifting screw Tr 65×12
3. Gear ratios 8:1, 12:1, 24:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated
25 Ton Machine Screw Jack (25T)
1. Maximum static load capacity 25 ton
2. Lifting screw Tr 90×16
3. Gear ratios 10-2/3:1, 32:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated		 35 Ton Machine Screw Jack (35T)
1. Maximum static load capacity 35 ton
2. Lifting screw Tr 100×20
3. Gear ratios 10-2/3:1, 32:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated		 50 Ton Machine Screw Jack (50T)
1. Maximum static load capacity 50 ton
2. Lifting screw Tr 120×20
3. Gear ratios 10-2/3:1, 32:1
4. Custom made stroke length
5. Translating, rotating screw design
6. Multiple screw jack lift systems
7. Anti-rotation keyed screw design
8. Handwheel, EPT motor operated
100 Ton Machine Screw Jack (100T)
1. Maximum static load capacity 100 ton
2. Lifting screw Tr 160×23
3. Gear ratios 12:1, 36:1
4. Custom made travel length
5. Translating, rotating screw design
6. Anti-rotation keyed screw design
6. Multiple units screw jack systems
7. Hand wheel operated, motor driven		  

Shipment and Packing Pictures 
Shipping:
1. EPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, price terms DDU, CPT etc.

Packing: 
100% standard exporting plywood cases. 
Note: International Exporting Standard Wooden Material with Free Fumigation.

JACTON Advantages
1. International standard materials for All JACTON brand products. We insist on choosing brand suppliers to supply the high quality raw materials to control the producing process. Optimization constantly the production processes, inspecting in each link and managing production site.
2. 100% quality assured with double quality inspections. The quality inspection by quality inspectors from processing to finished products as the first time. Before packing, the corresponding sales engineers must inspect the orders following the paper drawings, order quantities and special markings in the invoice or sales contracts as the second time. After that, fill in the inspection report with signature and company stamp.
3. 100% safety transportation. Packing with EPT standard export plywood cases materials (free fumigation), inner packing with epe foams to prevent products swaying and outer packing with iron sheets and fasteners to fasten the packages.
4. Internationl sales engineers have professional knowledge and skills on our standard products and service. They have enough ability to solve the basic technical problem immediately whatever by phone, online chat, face to face communications.
5. All the standard products with 2D CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Models (STEP, STP, MODEL, IGS, PRT and CATParT formats).
6. Custom design available, OEM service available, Free engineering advice, Free quotes available and Customer label available.
7. Inspection equipments include motor with inverter drive system, height adjustmemt motorized lifting system, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, digital noise meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and high precision clamp digital ammeter etc. 
8. Processing with modern advanced machines such as CNC gear hobbing machines, CNC flank grinding machines, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and others equipments.

Finished Projects
1. Theatrical solutions stage and orchestra platform lifts projects. Customers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 
2. Hydro EPT power station projects and water conservancy projects. Customers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom. 
3. Aircraft maintenance platforms and docking systems projects. Customers are from Pakistan, Singapore and United Arab Emirates.  
4. Solar panel tracking system projects. Customers are from Spain, India and Canada. 
5. Bolted steel storage tanks and silos lifting solutions. Customers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam. 
6. Dish antenna elevation and azimuth positioning projects. Customers are from Singapore, Malaysia and United States. 
7. Railway wagon projects. Customers are from South Africa. 
8. Beverage can production lines. Customers are from Netherlands, United States, Thailand and Indonesia. 
9. Steel factories production lines. Customers are from Iran, United States and Turkey. 
10. Continuous PU sandwich panel production lines. Customers are from Thailand and United Kingdom.  

JACTON Customers Areas(Countries)
1. American Countries: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European Countries: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
3. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. Oceanian Countries: Australia, New Zealand, Fiji.
5. African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

JACTON Products List
1. Manual Worm Gear Screw Jacks, EPT Worm Gear Screw Jacks.
2. Worm Gear Screw Jacks Series: JT series acme screw jacks, JTC series cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB series ball screw jacks, JTD series cubic ball screw jacks, JSS series stainless steel screw jacks, JTS series bevel gear screw jacks, Non-standard series screw jacks. 
3.  EPT Bevel Gearboxes Series: JT series bevel gearboxes, JTP series cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH series hollow shaft bevel gearboxes, BSS series stainless steel bevel gearboxes.  
4. Screw Lifting Systems and Systems Accessories: two-jacks systems, three-jacks systems, four-jacks systems, six-jacks systems, eight-jacks systems. Accessories cover couplings, universal joints, cardan shafts, connecting shafts, EPT motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod end bearings, stop nuts, limit switches, safety nut, travel nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and position indicators etc.
5. Heavy Duty Linear Actuators Series: Parallel heavy duty linear actuators, In-line heavy duty linear actuators.
6. Geared Motors and Speed Reducers Series: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, small AC gear motor series and worm gear motor reducer series.

Contact Information
Xihu (West Lake) Dis. EPT JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of screw jacks (mechanical actuators), bevel gearboxes, lifting systems, linear actuators, gearmotors and speed reducers, and others linear motion and power transmission products in China. We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited manufacturer and supplier. We also have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, we consistently provide the high quality equipments to meet the customers electro-mechanical actuation, lifting and positioning needs. JACTON Industry guarantees quality, reliability, performance and value for today’s demanding industrial applications.
Website (English): 
Website (English): 
Website (Chinese):  cn

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Screw China in Port Elizabeth South Africa falk lifelign gear couplings manufacturer Jack in Gaoxiong China, Taiwan Province of China elecon coupling manufacturer Operation Manual, Handing of Accessories, Installation and Maintenance with top quality lowest price

Slurry China in Tiruchirappalli India zapex coupling price Pump in Pretoria South Africa floating shaft gear coupling manufacturer Corrosion Resistance Rubber Frame Plate Liner with top quality lowest price

Slurry China in Tiruchirappalli India zapex coupling price Pump in Pretoria South Africa floating shaft gear coupling manufacturer Corrosion Resistance Rubber Frame Plate Liner with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Slurry Pump Corrosion Resistance Rubber Frame Plate Liner

Product Show


Product Description :

1. Slurry pump parts                                                                                                       

Completely interchangeable with NH, L, M, HH, SP slurry pumps and G/GH gravel pumps

For unlisted slurry pump parts, OEM service offered. Drawings needed.

2. Materials                                                                                                                       

High chrome alloy: A05, A07, A49, etc.

Natural rubber: R08, R26, R33, R55, etc.

Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.

 

3. Short delivery time                                                                                                     

For some parts, stocks are available. We have large producing capacity to shorten the delivery time.

4. OEM part codes                                                                                                           

Here we list some OEM part codes for reference:
Impeller: 127, 147, 145, etc., such as C2127, D3147, E4147, F6147, G8147, G10147, FAM1247…
Volute liner, C2110, D3110, E4110, F6110, G10110, G12110, …
AH Series Heavy Duty Slurry Pump Throat Bush code:
6/4 D-AH Slurry Pump  code: E4083
6/4 E-AH Slurry Pump  code: E4083
8/6 E-AH Slurry Pump  code: F6083
8/6 F-AH Slurry Pump  code: F6083
10/8 F-AH Slurry Pump  code: F8083
10/8 ST-AH Slurry Pump  code: G8083
12/10 ST-AH Slurry Pump  code: G10083
14/12 ST-AH Slurry Pump  code: G12083 

G Series Sand Gravel Pump
12/10G-G Sand Gravel Pump Throat Bush code: FG10013
14/12G-G Sand Gravel Pump Throat Bush code: GG1412013 

5. Frame & Bearing Assembly types                                                                           

Types: B, C, D, E, F, R, X, ST, T, TU, CC, DD, EE, FF, etc.

Testing Equipment

Packaging & Shipping

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Slurry China in Tiruchirappalli India zapex coupling price Pump in Pretoria South Africa floating shaft gear coupling manufacturer Corrosion Resistance Rubber Frame Plate Liner with top quality lowest price

Chemical China in Kanpur India gear coupling manufacturers manufacturer Oil in Kakinada India falk 1035g20 near me Fuel Petroleum Transfer Gear Oil Pump with High Temperature with top quality lowest price

Chemical China in Kanpur India gear coupling manufacturers manufacturer Oil in Kakinada India falk 1035g20 near me Fuel Petroleum Transfer Gear Oil Pump with High Temperature with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

1.Product Description

The series KCB/2CY gear oil pumps possess the advantages of simple and compact structure, easy operation and simple maintenance. The series KCB gear oil pumps are suitbble for transporting various oils such as petroleum, diesel and lubricant oils. When using copper gears, the pumps can converfluids with low flash points such as gasoline and benzene ate temperature below 70º C.

They are widely used in oil reservoirs, piers, ships, mining sites, factories and farms. The series 2CY gear oil pumps are mainly used for transporting viscous lubricants for mechanical equipment. When equipped with stainless steel gears, the pumps c EPT cooking oils or beverages.

2.Pump Technical Parameters

1, Flow rate: 18.3~2500 l/min

2, Suction distance: 5 m

3, Outlet diameter: 3/4″- 8 “

4, Outlet pressure: 0.28 – 1.45 MPA

5, Motor power: 1.5 KW-75 KW

3.Models Specifications for Clients Choosing(More Information Pls Contact Us)

 

Model Size Flow (L/min) Pressure (Mpa) Power (Kw) Speed (rpm)
KCB18.3 3/4″ 18.3 1.45 1.5 1400
KCB33.3 3/4″ 33.3 1.45 2.2 1420
KCB55 1″ 55 0.33 1.5 1400
KCB83.3 1 1/2″ 83.3 0.33 2.2 1420
KCB83.3 1 1/2″ 83.3 0.5 3 1450
KCB200 2″ 200 0.33 4 1450
KCB200 2″ 200 0.6 5.5 1450
KCB200 2″ 200 1.0 7.5 1450
KCB300 3″ 300 0.36 5.5 1450
KCB483.3 3″ 483.3 0.36 7.5 1450
KCB483.3 3″ 483.3 0.6 11 1450
KCB633 4″ 633 0.28 11 970
KCB960 4″ 960 0.28 18.5 1470
KCB1200 6″ 1200 0.6 37 740
KCB1600 6″ 1600 0.6 45 980
KCB1800 8″ 1800 0.6 55 740
KCB2500 8″ 2500 0.6 75 980

4.Pump Structures

5.Spare Parts Show

6.Product Advantages

1.Driving Gear Passive Gear
The active / passive gear after high temperature quenching, ion carburizing lime chloride. Gear has a stronger hardness, wear resistance, high temperature resistance, etc.. Can extend the service life of the gear.

2.High Temperature Bearing
High temperature bearings can bear larger load torque, under high temperature, good stability, high bearing capacity, withstand high temperatures. Wear small, long life. DEFU gear KCB18.3-KCB83.3 is the sliding bearing, KCB200 above is the rolling bearing.

3.Mechanical Seal
Carbide mechanical seal, with good heat resistance and impact resistance, friction coefficient is small, self lubricating performance, reliable performance, no leakage, high temperature resistance, wear resistance, corrosion resistance.

4.Integral Coupling
DEFU high temperature gear pump uses the integral coupling, safe and reliable, the concentricity is good, the service life is long, under the heavy load operation bears the torque ability to be strong.

5.100% Copper Motor
DEFU gear pump matching 100% copper motor, stable operation, low calorific value, output power standards, long service life.

6.Certificate of Inspection
DEFU out of the factory every gear pump has been strictly tested, and equipped with a certificate, manual, test data report, the ship with the Chinese classification society CCS certificate.

7.Product Details(Warmly Welcome To Contact Us)

8.Applications

KCB type gear pump is suitable for transporting heavy oil, mechanical oil, fuel oil and solid material, fiber, oil, chemical products, etc.. The pump is equipped with a safety valve to prevent damage to the pump and motor caused by overload.

9.Our Factory

Welcome to visit our factory!
All My Striving,For Your Satisfaction.
*********************************************************************************************
Head Office: HangZhou DEFU Machinery Co.,Ltd
Subsidiary Factory Name:ZheJiang Y&L Pump Co.,Ltd
Mobile :+86 -1857130095    Fax: 0086-571-88220971: +86~571-8822571/88220973-86553150
 

WebSite:

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Chemical China in Kanpur India gear coupling manufacturers manufacturer Oil in Kakinada India falk 1035g20 near me Fuel Petroleum Transfer Gear Oil Pump with High Temperature with top quality lowest price

Hitachi China in Bhavnagar India face gear coupling supplier Hydraulic in Salem India falk 1015g20 supplier Spare Parts for Hpv118 Used in Construction Machinery with top quality lowest price

Hitachi China in Bhavnagar India face gear coupling supplier Hydraulic in Salem India falk 1015g20 supplier Spare Parts for Hpv118 Used in Construction Machinery with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

 

This table lists the company’s sale of most of products.
Series/Part no. Description
(1)  Rexroth / Uchida Rexroth A2FO/A2FM/A2FE10-250, A2F12-500, A2VK5-55MA, A6V28-250, A7/8V28-500, A8V80-107  
  A6VM/A7VO28-500, Uchida A8VO55-200  
  A4VSO40-500, A4V40-250, A4VG28-250,  A10VSO18-140,  A10VG28-63  
  Uchida AP2D12-38,  A10V/VD/E40-43, Rexroth A11VG50,  A11VO40-260, A20VLO260  
   
(2)  Vickers PVB/MPVB5-110, PVQ10-32, MFB5-29,  PVE19-21,  PVH45-141, PVD45, PVM571,
  PVXS130-250
(3)  Eaton 3321,  3932,  4621,  5421,  6423,  7621, 78462  
(4)  Sauer Sundstrand SPV14-18, PV20-27, MPV046, PV90R30-250  
(5)  Caterpillar VRD63, AP12-14, 320C, SPK10/10, SPV10/10  
  E200B new, 12G, 14G, 215, 245, 330B, PSV450, 992/963  
(6)  Liebherr LPVD45 / 64 / 90 / 100 / 125 / 140 / 250 / 260  
(7)  Linde HPR75/100/130/160, B2PV35-140, BMF50-105, BPV35-70, BMV75.27, BPR140/186/260  
(8)  Parker / Volvo F11-005 / 571 / 150 / 250,  F12-060 / 080 / 110  
(9)  Kawasaki / Teijin Main pumps: K3SP36C, K3V63-280, K5V80-200, NV64-270, NX15, NVK45, KVC925-932  
  Swing motors: M2X63-210, M5X130-180, MX150-500  
  Travel motors: MAG150-170, GM05/06VL, GM05/07VA, GM08-23/30H/35VA/35VL/38VB, DNB08  
(10)  Komatsu Main pumps: HPV35/55/90/95/132/160, PC40-8, PC60-7, PC100/200/300/360/400  
  Swing motors: PC45R-8, 60-6/7, KMF40-105, KYB33-87, PC200-6/7, 300, 400, 650  
  Travel motors: HPV105  
(11)  Hitachi Main pumps: HPV091 / 102 / 116 / 125B / 145  
  Swing motors: EX120-2/5  
  Travel motors: HMGC32 / 35, HMGE36, EX550-3  
(12)  Toshiba Swing motors: SG02 / 571 / 04 / 08 / 12 / 571, PVC90R, PV090  
(13)  Kayaba / Sumitomo MSG-27P/44P, MSF-85, MAG-33VP, JMV-53/34, PSVD2-21E/26E, PSV2-55T, 280  
(14)  Kobelco Travel motors: SK200-1/3/6, SK220-2/3 (MA340), SK320 & SK430  
(15)  Nachi PVD-2B-32L / 34 / 34L / 36L/38/40/42, PVK2B-505, YC35-6  
(16)  Kato Travel motors: HD400 / HD450V-2 / HD1571 / HD3000  
(17)  Tokiwa MKV23 / MKV33
(18)  Bobcat 331 & 337
(19)  Hawe V30D95-250, V60N
(20)  Tadano Tadano 100, 150
(21)  Denison PV29-74
(22)  Parker Parker BMHQ30/PV092/140/180  
Rotary group parts for hudraulic piston pump,meet with special market,
advanced technology,perfect design,top quality    

Our company can supply a large number of  piston pump (motor) accessories, Specific models are as follows:

 We sell the  hydraulic piston pump (motor) which currently has more than 1185 kinds of varieties and reducer assembly parts varieties has more than 12367 kinds of (including plunger sliding boots, cylinder, oil distribution plate, swing, variable piston, drive shaft, skeleton oil seal, gear pump, rod, pressure plate, central shaft, spindle, inclined plate, the ball hinge spring, ball joint, back plate, the thrust plate, friction plate, separator, oil distribution disc plug, bushing spring and other parts).We believe there is always a product that you will need.
 
Product Description:

 

More brands of pumps parts:

EPT EXCAVATOR SERIES:
HPV35 (PC60); HPV55 (PC120); HPV90 (PC200-3); HPV90 (PC200-5); PHV95 (PC200-6, PC120-6 in addition to the pump shaft). HPV132 (PC300-7, PC400-6); HPV160 (PC300/400-3/5); HPV135; PC30UU; PC40-8 main pump; PC50 (PC55/56); PC60-7 main pump (HPV75); PC160; PC200-2 (main pump); PC200-8 main pump/PC240-8 main pump; PC320; PC360-7 main pump (PC300-7); PC400-7 main pump; PC1250 main pump; PC45R-8 rotation; PC60-6 rotation; PC60-7 rotary; PC120-6 rotation; PC200 – six rotary/LMF45; PC200-7 rotary motor; PC450 rotation; PC300-6 rotation; PC200-7 walk; PC400-7 walk; HPV220-8 rotation; PC650 rotary.

 

CAT SERIES:
VRD63 (CAT120) double pump; SBS80 (CAT312C) main pump; E200B (new) double pump; AP – 12 double pump; AP-14 (CAT325C); CAT320C double pump; SPK10/10 (E200B) double pump; SPV10/10 (MS180) double pump; CAT12G; CAT14G / 16 g; CAT215; CAT245; Walking CAT330B motor; Walking PSV450 (AP-12); CAT992; CAT330C walk; CAT385H.

 

KYB SERIES:
PSVD2-16 e (1.6 2 tons of sunvo intelligent); PSVD2-21 c (KYB); PSVD2-21 e (KYB) 4 t/SVD22 little dig primary pump; 27 PSVD2-26 e/e (KYB); KYB – 25 cc (45 ishikawa island, long yasuda K040 / K045); Ishikawa island 60; PSVL-54 (yasuda KYB long 6 tons of 155 drivers); PSVK2-25; KMF40; KMF40-2; KMF90 (KPV90) PC200-1/2/3 (rotary, walking); KMF105; KYB33; KYB36; KYB37; KYB87; KYB90 (MSG – 60 p); MSG – 27 p (KYB)/LSGMF27/10 w; MSG-44 p (KYB)/LSGM44/10 w-R21; MAG-vp-480-e-2 (4-5.5 tons of small excavators walking motor); MSF-85 (instead of ZF motor); PSV2 sumitomo 120-55 t (KYB); Sumitomo 280 rotary; V25..

NACHI SERIES:
PVD-2-b-32 l; PVD-2-b-34 walk; PVD-2-b-34 l (small dig primary pump); PVD 38/40-2-36 b/l; PVD-2-b-42; PVD -2-b-63; PVD45; Nachi 130; PVK-2-b-505 (ZAX55 main pump); YC35-6 yuchai little dig a rotary motor; YC35-6 yuchai little dig walking motor; PCLS 18-200-b (yuchai 55 rotary); The bobcats 331 drivers (rotary); The bobcats 337 walking (motor).

TOSHIBA SERIES:
SG02; SG571 (MFB40); SG04 (MFB80); SG08 (MFB160); SG12; SG20 (MFB250); PVB92 (PVC90RC08 / PVC70R) (8.5 tons of drivers Toshiba 8 tons, yuchai); PV090; PV092 (PV080 gm); PSVS – 90.

JIC SERIES:
JMV-44/22; JMV-53/34 (6 to 8 tons of small excavator walking motor); JMF-64; JMV147/95; JMF-151-VBR (22 sm1510117); JMF-155.

LIEBHERR SERIES:
LPVD45; LPVD64; LPVD75; LPVD90; LPVD100; The new LPVD100 (914); LPVD125; The new LPVD125; LPVD140; LPVD250; LPVD260.

KOBELCO/KATO SERIES:
SK250-8 main pump; SK200 – a third walking motor; SK220-3 (MA340 walking motor); SK200-6 walking motor; SK200-6 new walking; Walking SK320 motor; M3V150 (SK220-2) walking motor; Walking SK430 motor; Kato 400 drivers motor; HD450V – 2 (kato); HD3000; DH55 55 drivers rotary motor (daewoo); T3X128 / daewoo 300-7 rotary; Daewoo walk 225-7; Daewoo DH370 rotation; Modern 60-7 rotary motor; Modern 480 rotary motor.

KAWASAKI SERIES:
K3SP36C (SDV36) 8 tons medium-sized drivers main pump; K3V63DT (K3V63BDT); K3V112DT; K3V140DT; K3V180DT; K3V280; K3VG280; K3VG180; K3VL45; K5V80; K5V140 (doosan 300-7); K5V160 (modern 300-6 main pump); K5V200 (450/470 in Japan, god steel 470, Keith 480 main pump); K7V63; NV64; NV84; NV111DT; NV137; NV172; NV270; NX15; NVK45 steel drivers (god); KVC925; KVC930; KVC932.

KAWASAKI SWING SERIES:
M2X63; M2X96 (EX200-2); M2X120; M2X146 (EX200-5); M2X150/170 (EX400); M2X210 (EX270/280/300); M5X130 (CAT320C); M5X180 (steel 350-8 god); MX150; MX173; MX500; MAG150; MAG170; LZV30; LZV120; LVW060; TM40VD walk; Modern 300-5.

NABTESCO TRAVEL SERIES:
M2X63; M2X96 (EX200-2); M2X120; M2X146 (EX200-5); M2X150/170 (EX400); M2X210 (EX270/280/300); M5X130 (CAT320C); M5X180 (steel 350-8 god); MX150; MX173; MX500; MAG150; MAG170; LZV30; LZV120; LVW060; TM40VD walk; Modern 300-5.

REXROTH SERIES:
A4V40; A4V56; A4V71; A4V125; A4V250; A4VFO28; A4VSO40; A4VSO71; A4VSO125; A4VSO180; A4VSO250; A4VSO355; A4VSO500; A4VF500 / A4F500; A4VG28 (A4F571); A4VG40; A4VG45; A4VG50; A4VG56; A4VG71; A4VTG71; A4VG90 (32 A4VT90HW/r); A4VHW90; A4VTG90 fill oil pump (thick); A4VG125; A4VG125 pump; A4VG125 pump type (normal use); A4VG125 pump type A10VO28 (string); A4VG12 fill oil pump (giant); A4VG140; A4VG180; A4VG250; A10SO16/18; A10VSO28; A10VSO45; A10VSO45/52; A10VSO63/52; A10VSO63/53; A10VSO71; A10VSO85; A10VSO100; A10VSO140; A10VG18; A10VG28; A10VG45; A10VG63; A10V43 (double pump); A10V63; A10VD40 (double pump); A10VD43 (double pump); A10VE43; A10VEC60; A10VSF28; A11V040; A11VG35; A11VG50; A11VO60; A11VO75; A11VO95 (A11V95); A11V130; A11V145; A11V160; A11V190 (A11VLO190); A11VO200; A11VO250; A11VL0260.

REXROTH BEND AXIS SERIES:
A2F5;A2F12;A2F23;A2VK28;2VK28;A2F28;A2F55;A2F80;A2F107;A2F160;A2F200; A2V225;A2F250;A2V500;A2V915;A2F355;A2F500;A2F1000;A2FO10;A2FO12;A2FO16;A2FO23;A2FO28;A2FO32;A2FO45;A2FO56;A2FO63;A2FO80;A2FO90/A2FE90;A2FO107;A2FO125(A2FM125);A2FO160;A2FO180;A2FO200;A2FO250;A2FO500;A6V28;A7V55/A8V55;A7V58;A7V80/A8V80;A7V107/A8V107;A7V160/A8V160;A7V200;A7V225;A7V250;A7V355;A7V500;A6VM/A7V1000;A6VM/A7VO12;A7VO28;A7VO55;A7VO80;A7VO107;A7VO160;A6VM160;A6VE160;A6VM200;A6VM500;A7VO172;A7VO200;A7VO250;A7VO355;A7VO500.

REXROTH-UCHIDA SERIES:
1(REXROTH)A8VO55/A8VO80/A8VO80/6.3/A8VO107(SUMITOMO 280)/A8VO140/A8VO160/A8VO200
2(REXROTH)AP2D12( EPT 331MAIN PUMP)/AP2D16(CASE 35)/AP2D21/AP2D18(IHISCE 45 MAIN PUMP)/AP2D25(DH55 MAIN PUMP)/AP2D36/ZAX70 MAIN PUMP

SAUER SERIES:
PV20;PV21(PVD21);PV22;PVD22;PV23(PVD23);PV24;SPV6/119;PV25;PV26;PV112;OPV27;MF16A;MFO35;MF500;MPVO46/M46;MPR63;MPV45.

SAUER 90 SERIES:
PV90R30;PV90R42;PV90R55;PV90R75;PV90R100;BRL100;PV90R130;PV90R180;PV90R250;SPV14;SPV15;SPV18;MMF571C;MPT044;M44;HRR057.

EATON SERIES:
3321/3331 (Eaton, 006); Eaton 3322 (EATON3322); 4621/4621-007; 5421/5431 (Eaton 23); Keith 1460 (CASE1460); Keith CS05A; Eaton 3932-243; Eaton 6423; (Eaton 24-7620-7621); Roller (Eaton, 78462).

EATON-VICKERS SERIES:
PVE19;TA19;PVE21;PVH45;PVH57;PVH74;PVH81;PVH98;PVH106(HPN-1398);PVH131;PVH141;PVB5;PVB6;PVB10;PVB15(PVQ32);PVB20;PVB29;PVBQA29-SR;PVQ40/50;PVB110;TB35;B45.

TOKIWA SERIES:

MKV23/MKV33

TADANO SERIES:

(TADANO)100/150
HAWE SERIES :
V60A;V60A;V30D95;V30Z95;V30D140;V30D250
LINDE SERIES: 
HPV55T ; HPR75; HPR100; HPR105; HPR130; HMR135; HPR160; , 160; B2PV35; B2PV50 (BPR50); B2PV75 (BPR75); B2PV105 (BPR105); B2PV140; BPV35; BPV50; BPV70; BPV100; BMV75.27; BPR140; BPR186; BPR260; BMF50; BMF75; BMF105.
PARKER SERIES:
F11-005;F11-571;F11-571;F11-28;F11-39;F11-58;F12-060;F12-080/F12-090;F12-110-MF-1H;F11-150;F11-250;PVXS130;PVXS180;PVXS250;PVSO250;PV180;PV250;PLV250;PVM-018;PVM-571;BMHQ30/PV180;PAVC38;PAVC65;PAVC100;2145/P2145;23;PZ075;270/PV270;PVP76;PV29;PV74;PV0087;P76;PVG130 B;PSV600;PVT38;PVT38;PVT64;PK100;PMT14/18;P080;P2105;P2060;BZ732-100;SH5V/131.
YUKEN SERIES:
A16;A22;A37;A45;A56;A70;A90;A145
HARVESTER SERIES:
HPVMF23(T23C);HPVMF23.7;T28C;T30C;T37C

All these accessories are completely interchangeable with original, high quality and low price.

Our Company Service

1) We can help buyers design specific products or produce products according to buyers’design

2) We can print logo according to buyers’ requirement

3)We has exported to many countries,such as Korea, USA, German, etc.

 

Customer Service

1. You may email us through the Alibaba messaging system if you have a question

or would like to submit a comment.

2. Generally, email will be responded to within 24 hours; except on every Sunday

and holidays. We will reply as soon as we back in office.

2. We will send you tracking information to the e-mail address you have registered with Alibaba.

3. If you don’t see what you are looking for, just send us an e-mail with picture/picture

and we will be glad to help you.

4. Positive feedback is very important to us.

 

Packaging & Shipping
Delivery Details

Delivery time depends on the destination and other factors, it may up to 7 work days.

In order to ensure you receive you order tax free upon import, we will declare it as a “Sample”with a lower value.This lower price does not reflect the total price you paid.

After we ship the goods, we will email you the shipping information, as well as tracking number.

 

FAQ
Questions you maybe inquiry

Q1:Could you custom products?

We can manufacture it according to your drawings or samples.

Q2: I want to buy your products, how can I pay?

A :You can pay via T/T , WEST UNION or other payment terms we reach agreement.

Q3: How can you guarantee the quality?

A: One year’s warranty against B/L date.

If You meet with quality problem, we promise to responsible for it.

Q4: If we don’t find what we want on your website, what should we do?

A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.

Q5: Can we buy 1 pc of each item for quality testing?

A: Yes, we understand quality test is important and we are glad to send 1pc for quality testing.

Q6: What is the lead time?

A: For this product, normally 3 days,3 days and lead time is calculated from the day we receive your deposit.

Exact time is determined by factory schedule.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Hitachi China in Bhavnagar India face gear coupling supplier Hydraulic in Salem India falk 1015g20 supplier Spare Parts for Hpv118 Used in Construction Machinery with top quality lowest price

RV China in Zaporizhzhya Ukraine maina coupling Series in Belfast United Kingdom helical coupling factory High Quality Worm Gear Box Speed Reducer with top quality lowest price

RV China in Zaporizhzhya Ukraine maina coupling Series in Belfast United Kingdom helical coupling factory High Quality Worm Gear Box Speed Reducer with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

SINGEL STEP WORM GEAR REDUCER

The reducer which model is 25~90 made of Aluminum alloy die-casting box,good looking in appearance,compact in structure,rust proofing on surface and small volume to save mounting space.
The reducer model of 110~150 is made of cast iron which casted with Aluminum mould.It`s good looking and solid, and can be used through the setting of multi-azimuth.
Good radiating characterstic leads safe and reliability,and high efficiency for using.
The EPT capacity of loading ensure stable transmission,make less vibration and noise.
Varies of connecting structure for power input and torque output meet different require-merits;
the design of box outline and the set of foot hole with good versality is apt to many kinds of mounting.

APPLICATION
Agriculture, Air Movement Products, Chemical, Construction, Crane & Hoist, Crusher, Drill Rig Duty, Elevators / Escalators, Food and Beverage, Forestry, Healthcare, Irrigation Systems, Manufacturing, Marine, Material Handling, Medical Equipment, Metal Processing, Mining, Oil and Gas, Packaging, Paper Processing, Petrochemical, Pharmaceutical, Plastics, Port Machinery, Pulp and Paper, Pump, Rail Duty, Refinery & Petrochemical, Rock Crusher, Solar, Steel, Sugar & Ethanol, Textiles, Wind Energy
Applications
Conveyors, Cranes and Hoists, Elevators, Escalators, Fans, Gates, Irrigators, Machinery, Mixers, Packaging Equipment, Pools, Specialty Trucks and Vehicles, Wind Turbines, X-Ray Equipment, Airports, Boats and Yachts, Energy Installations (Deserts, Wind Farms), Foundries, Off-shore Oil Rigs, Mining Sites, Factories, Supermarkets, Refineries, Ports, Railways, Farms.

PRODUCTION
Our worm gear speed reducer, helical gear speed reducer, worm helical gear speed reducer, speed variator, cycle-drive gearboxes, couplings, door/gate operators and so on are high quality and welcomed by our customers. We supply both standard goods and also can produce as per your drawing. Your detail enquiry will be high appreciated.
Our Worm gearbox reducer has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11. Parallel axis-bevel wheel speed-down motor.
 

Type Worm Gear Speed Reducer Gearbox
Model NMRV571-150
Ratio 5,7.5,10,15,20,25,30,40,50,60,80,100
Color Blue / Silver or OEM colors
Material Housing-Casting iron-HT200# / Aluminium
Worm Gear KK alloy
Worm 20CrMnTi with carburizing and quenching, surface hardness is 58-62HRC
Shaft chromium steel-45#
Bearing Brand “HRE”,”C&U” Bearing
Seal NAK or SKF
Input Power 0.06-15KW
Usages In industrial machine: Food stuff,Ceramics,chemical, aswell as packing, printing,  dyeing,woodworking, glass and plastics..
IEC Flange 56B5,63B5,80B5,90B5,100B5,112B5,132B5….
Lubricant BODA Synthetic oil(RV030-90),G-N460W Mineral oil(RV110-150)

SPEC AND PARAMETER

Center Distance
A		 Motor Flaange UA The Hole Diameter fo Shaft
PAM IEC N M P I Transmission Ratio
5 7.5 10 15 20 25 30 40 50 60 80 100
NMRV571 56B14 50 65 80 9 9 9 9 9 9 9 9 9 9 – –
NMRV030 63B5 95 115 140 11 11 11 11 11 11 11 11 11 – – –
63B14 60 75 90 11 11 11 11 11 11 11 11 11 – – –
56B5 80 100 120 9 9 9 9 9 9 9 9 9 9 9 –
56B14 50 65 80 9 9 9 9 9 9 9 9 9 9 9 –
NMRV040 71B5 110 130 160 14- 14 14 14 14 14 14 14 – – – –
71B14 70 85 105 14 14 14 14 14 14 14 14 – – – –
63B5 95 115 140 11 11 11 11 11 11 11 11 11 11 11 11
63B14 60 75 90 11 11 11 11 11 11 11 11 11 11 11 11
56B5 80 100 120 – – – – – – – – 9 9 9 9
NMRV050 80B5 130 165 200 19 19 19 19 19 19 19 – – – – –
80B14 80 100 120 19 19 19 19 19 19 19 – – – – –
71B5 110 130 160 14 14 14 14 14 14 14 14 14 14 14 –
71B14 70 85 105 14 14 14 14 14 14 14 14 14 14 14 –
63B5 95 115 140 – – – – – – – 11 11 11 11 11
NMRV063 90B5 130 165 200 24 24 24 24 24 24 24 – – – – –
90B14 95 115 140 24 24 24 24 24 24 24 – – – – –
80B5 130 165 200 19 19 19 19 19 19 19 19 19 19 – –
80B14 80 100 120 19 19 19 19 19 19 19 19 19 19 – –
71B5 110 130 160 – – – – – – – 14 14 14 14 14
71B14 70 85 105 – – – – – – – 14   14 14 14
NMRV075 100/112B5 180 215 250 — 28 28 28 – – – – – – – –
100/112B14 110 130 160 – 28 28 28 – – – – – – – –
90B5 130 165 200 – 24 24 24 24 24 24 24 – – – –
90B14 95 115 140 – 24 24 24 24 24 24 24 – – – –
80B5 130 165 200 – – – – 19 19 19 19 19 19 19 19
80B14 80 100 120 – – – – 19 19 19 19 19 19 19 19
71B5 110 130 160 – – – – – – – 14 14 14 14 14
NMRV090 100/112B5 180 215 250 – 28 28 28 28 28 28 –   – – –
100/112B14 110 130 160 – 28 28 28 28 28 28 – – – – –
90B5 130 165 200 – 24 24 24 24 24 24 24 24 24 – –
90B14 95 115 140 – 24 24 24 24 24 24 24 24 24 – –
80B5 130 165 200 – – – – – – – 19 19 19 19 19
80B14 80 100 120 – – – – – – – 19 19 19 19 19
NMRV110 132B5 230 265 300 – 38 38 38 38 – – – – – – –
132B14 130 165 200 – 38 38 38 38 – – – – – – –
100/112B5 180 215 250 – 28 28 28 28 28 28 28 28 28 – –
90B5 130 165 200 – – – – – 24 24 24 24 24 24 24
90B14 95 115 140 – – – – – 24 24 24 24 24 24 24
80B5 130 165 200 – – – – – – – – – – 19 19
NMRV130 132B5 230 265 300 – 38 38 38 38 38 38 38 – – – –
132B14 130 165 200 – 38 38 38 38 38 38 38 – – – –
100/112B5 180 215 250 – – – – – 28 28 28 28 28 28 28
90B5 130 165 200 – – – – – – – – – – 24 24
90B14 95 115 140 – – – – – – – – – – 24 24
NMRV150 160B5 250 300 350 – 42 42 42 42 42 – – – – – –
132B5 230 265 300 – – – – 38 38 38 38 38 – – –
132B14 130 165 200 – – – – 38 38 38 38 38 – – –
100/112B5 180 215 250 – – – – – – – – 28 28 28 28

COMMODITY DISPLAY

PRODUCT STRUCTURER

COMPANY PROFILE


PACKAGING & SHIPPING
Packing: Wooden Box/Wooden Pallet
Shipping: 7-15 days upon receipt of deposit. By Sea/By Air/By Courier
Package can be made as per customer’s request

WHY CHOOSE OUR HENKOOLEE?
1. A leading factory of diamond tools industry in China
2. Approved the best quality with very competitive price
3. Good sharpness, stable performance, high cutting efficiency and long lifespan
4. Strict quality control system, accept inspection by 3rd party, as ISO9001, ISO14001 and OHSAS18001 systems.
5. We have very experienced R&D engineers and we have EPT ability to do ODM projects.
6. Custom design can be meet upon request, small trial order is available in any time, We offer OEM services. Can print your own logo on product , can customize the retail box packing and other things.
7. Easy communication,HENKOOLEE professional sales team will always answer you in time, besides, friendly and helpful after sales service is always there for you.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

RV China in Zaporizhzhya Ukraine maina coupling Series in Belfast United Kingdom helical coupling factory High Quality Worm Gear Box Speed Reducer with top quality lowest price

Factory China in Campo Grande Brazil gear coupling 102 shop Price in Kanpur India gear coupling manufacturers supplier Carbon Steel Large Diameter Forged Spiral Internal Tooth Gear with top quality lowest price

Factory China in Campo Grande Brazil gear coupling 102 shop Price in Kanpur India gear coupling manufacturers supplier Carbon Steel Large Diameter Forged Spiral Internal Tooth Gear with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Accept drawing and sample custom

Quick Details

Material Carbon Steel, Stainless Steel, Copper, Brass or as You Required
Processing Forging , Casting or Welding
Heat Treatment High Frenquency Quenching and Hard Teeth
Surface Treatment Blacken or Galvanized as You Required
Standard GB1244-85, DIN8187,8188, OEM, ANSI or DIN
Payment T / T  L/C

Supply Ability
Supply Ability: 6000 Piece/Pieces per Month

Packaging & Delivery
Packaging Details
Standard package:  
1.Inner Plastic Bag,Carton Box and Wooden Case   
2.Or Customer’s requirement
Port
ZheJiang , China
Lead Time :

Quantity(Pieces) 1 – 10000 >10000
Est. Time(days) 10 To be negotiated

Our Advantage 
—We have over 20 years ODM &OEM experience
—100% to test before shippment goods
—24Hours for services ,Any questions, we will face it together
—Use the best material for product ,each year, our OEM team will design new items according to the market need

Workshop

Other products

 About us
HangZhou EPT GEAR Co., Ltd. With a history of more than 20 years, is specialized in producing sprocket, gear, coupling, taper bush and other transmission products. 

The company was founded in 1993 and currently employs more than 100 people. It covers an area of 18, 000 square meters, with more than 250 sets of various kinds of metal processing equipment, including 90 sets of CNC equipment. 

We adopt the following standard to produce our products: ISO 606; ANSIB 29.1; DIN 1801; GB 124-97. 

Our products are exported to more than 60 countries and regions, including U. S. A, Japan, Germany, Italy, Argentina, South Africa. 

Sprocket is our main items for exporting. We can supply you various kinds of sprocket, Pitch size from 1/4″ to 4″ and teeth No. From 8 to 150. 

We always offer our customers competitive price, excellent quality and prompt delivery. We always consider customer’ S requirements first. Our aim is: “Customer’ S satisfaction is our pursuit”. 

We sincerely hope to set up long-term business relations with every custom on the basis mutual benefits and friendship.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Factory China in Campo Grande Brazil gear coupling 102 shop Price in Kanpur India gear coupling manufacturers supplier Carbon Steel Large Diameter Forged Spiral Internal Tooth Gear with top quality lowest price

Siemens China in Taibei China, Taiwan Province of China dodge gear coupling supplier Simogear in Samarinda Indonesia helical shaft coupling manufacturer Bevel Helical Gear Motors with top quality lowest price

Siemens China in Taibei China, Taiwan Province of China dodge gear coupling supplier Simogear in Samarinda Indonesia helical shaft coupling manufacturer Bevel Helical Gear Motors with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Introduction 
Bevel helical gear units are part of the SIMOGEAR modular system which essentially comprises bevel helical, parallel shaft, worm gear units or mechanically variable speed drives. With three or single phase AC motors with or without brake, all imaginable drive combinations up to electronic speed variable drives are possible 

Bevel helical gear units are designed for continuous duty under the most arduous operating conditions.

The sturdy gear housings are manufactured of high grade cast-iron and dampen vibrations.

Lubricant loss and entry of dust and water are effectively pre- vented by radial shaft seals with dust and protective lips.

The gears of the helical stages are hobbed, case hardened and profile ground or honed. Furthermore, gear theeth are profile corrected and crow- ned for optimum performance.

The bevel stage for the standard program is hobbed, case hardened and lapped.

The achieved precision allows higher torque respectively smaller units. Helical gearing provides for quiet operation. The design principle to install the bevel stage between two helical stages helps to decrease noise too, above all for higher speeds. 

The output and input shafts are in right-angle position. 

Design Variations

The standard unit is available for use in all mounting positions. 

The gear boxes are manufactured as solid shaft gear boxes or as hollow shaft gear boxes with tted key, shrink disc or splined shaft connections.

Recessing shafts, which t in the hollow shafts on the non preference series, are to be made from a higher strength material,like 42CrMo4, 16MnCr5 or similar. 

Data required for selection 
The following data is required in order to select the correct gearbox:

1. Type of driven machine
2. Daily operating time h
3. Required input power kW or required torque Nm
4. Required output speed n 2 of the geared motor rpm or gearbox ratio i
5. Operating voltage V and frequency Hz
6. Operating mode, number of startings, inverter-fed operation, type of startup
7. Moment of inertia J Load kgm2 of the driving machine reduced to the motor shaft
8. Type of power transmission on gearbox shafts (direct, coupling, belt, chain, gear wheel)
9. Radial force F r N at the input shaft and direction of force with distance from the shaft shoulder to the point of application and axial forceFax: 0086-571-88220971 [N] with direction of force
10. Ambient temperature oC
11. Degree of protection
12. Mounting position
13. Required braking torque Nm
14. Any regulations (CSA, VIK, etc.) 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Siemens China in Taibei China, Taiwan Province of China dodge gear coupling supplier Simogear in Samarinda Indonesia helical shaft coupling manufacturer Bevel Helical Gear Motors with top quality lowest price

Xiaohu China in Abeokuta Nigeria teflon gear coupling price Back in Ankara Turkey bowex m42 coupling price Gear for Construction Hoist with top quality lowest price

Xiaohu China in Abeokuta Nigeria teflon gear coupling price Back in Ankara Turkey bowex m42 coupling price Gear for Construction Hoist with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Construction Hoist Parts Xihu (West Lake) Dis. Roller Mast Section Roller
High quality construction hoist spare parts 
High quality GJJ, BAODA material hoist spare parts
 Packaging & Delivery

 

Packaging Details: wooden case
Delivery Detail: about 7-15 days after receiving T/T payment
 

All kinds of hoist spare parts , GJJ,BAODA,ZOOMLION,TIGER,
Driving device with 2-motors / 3-motors;
motor: 11kw, 14.5kw,18kw;
motor spare parts: braking system; brake sheet, motor adjustor, electromagnet,motor fan.
safety device: 30KN,40KN,50KN,60KN;
gearbox: 16:1,14:1,12:1;10:1;
coupling with rubber;
master rollers for 76 tube and 89 tube;
gear rack M8 40x60x1508mm;
gear pinion: M8,15teeth;
limit switch;
gate rollers;
counter rollers;
transformer;
Overload protect system;
cable: 3×16+2×6, 3×16+2×10

Product Description

Name Description
Brand  STRONG
Color As your requirement
Material  NBR, SILICONE, VITON, HNBR, CR, PTFE, EPDM, etc. Can choose on your requirement.
Feature Hot sale 
Packing Wooden case
Delivery 7-15days after receiving T/T payment
Port ZheJiang
Stock rich
OEM and ODM welcome

All kinds of hoist spare parts , GJJ,BAODA,ZOOMLION,TIGER,
Driving device with 2-motors / 3-motors;
motor: 11kw, 14.5kw,18kw;
motor spare parts: braking system; brake sheet, motor adjustor, electromagnet,motor fan.
safety device: 30KN,40KN,50KN,60KN;
gearbox: 16:1,14:1,12:1;10:1;
coupling with rubber;
master rollers for 76 tube and 89 tube;
gear rack M8 40x60x1508mm;
gear pinion: M8,15teeth;
limit switch;
gate rollers;
counter rollers;
transformer;
Overload protect system;
cable: 3×16+2×6, 3×16+2×10

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Xiaohu China in Abeokuta Nigeria teflon gear coupling price Back in Ankara Turkey bowex m42 coupling price Gear for Construction Hoist with top quality lowest price

Best China in Bologna Italy falk 1015g20 shop Minature in Kitwe Zambia drum gear coupling sales Linear Actuators, Micro Leveling Jacks, Mini Screw Thread Lift Manufacturer with top quality lowest price

Best China in Bologna Italy falk 1015g20 shop Minature in Kitwe Zambia drum gear coupling sales Linear Actuators, Micro Leveling Jacks, Mini Screw Thread Lift Manufacturer with top quality lowest price

We – EPG Team the biggest couplings and gears manufacturing facility in China with five diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

We are the ideal minature linear actuators, micro leveling jacks, mini screw thread lift manufacturer and supplier in China. Go to https:// /item/five hundred-lbs-ability-worm-equipment-mini-equipment-screw-jack.html to discover much more about minature linear actuators, micro leveling jacks, mini screw thread raise.

Features
1. Upright or inverted installation with greatest static load ability 2.five kN (250 kg)
two. Self-locking machine screw with no want brake or lock mechanisms to maintain placement. 
3. Equipment screw diameter 14mm, pitch 4mm (solitary start off acme thread).
four. Available in five:1 and twenty:one ratios.
five. Customise vacation length, max. 1500mm with rigidity load. 
six. Translating screw (travelling screw jack), keyed screw for anti-rotation (keyed screw jack), and rotating screw (travelling nut screw jack) as the normal configurations.
seven. Mini handbook screw jack with 125mm diameter handwheel. Option mini EPT screw jack with small motor, but can not immediately coupled with motor flange, ONLY connection by coupling for foot mounted.
8. Separately mini screw jack use, or mini screw jack lift system, joined by couplings, connecting shafts, mini bevel gearboxes with 1:one ratio.

Buildings and Components
1. Lifting screw substance – C45 metal
2. Worm (input shaft) content – C45 steel
3. Worm gear material – bronze
4. Housing (gearbox) content – ductile iron, or aluminum
five. Traveling nut – bronze  

Specs
The mini screw jack specifications consist of highest load capability, worm screw diameter and pitch, worm equipment ratio, allowable maximum input energy, torque and pace and all round effectiveness and so on. 

1. Problems: 20% running time/60 minutes or thirty% working time/10 minutes, twenty °C ambient temperature. Maximum allowable input electrical power .18kw, when your selection is EPT the optimum input power, the operational restrictions owing to thermal boundaries. you will want to decide on the greater dimensions screw jacks in get to let powerful heat dissipation. 
two. H=higher ratio five:1 (.8mm stroke for one particular input flip), L=slow ratio 20:one (.2mm stroke for a single enter flip).
3. Nm=enter torque needed, kW=input energy essential. 
4. Choice of mini screw jack using previously mentioned figures must only be carried out in consultation with Jacton engineers.

Assembly Drawings
Discover out mini screw jack front see, aspect view and top look at assembly drawings. About 2d Autocad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings, you should make contact with us directly.

Cargo and Packing Pictures 
Delivery:
one. EPT freight: seaport to seaport, price phrases CIF, FOB, EXW, CFR and many others.
two. Air freight: airport to airport, cost terms EXW, CRF and many others.
3. Air courier: DHL, FEDEX, UPS, TNT doorway to doorway cargo, price tag conditions DDU, CPT and so on.
Packing: 
100% regular exporting plywood circumstances. 
Observe: International Exporting Regular Wood Material with Free Fumigation.

JACTON Rewards
one. International normal materials for All JACTON manufacturer items. We insist on deciding on manufacturer suppliers to supply the high good quality uncooked supplies to control the making approach. Optimization continuously the production processes, inspecting in each and every hyperlink and taking care of generation internet site.
two. one hundred% good quality certain with double good quality inspections. The high quality inspection by good quality inspectors from processing to completed merchandise as the 1st time. Before packing, the corresponding revenue engineers should examine the orders following the paper drawings, purchase portions and special markings in the bill or sales contracts as the next time. Following that, fill in the inspection report with signature and firm stamp.
three. 100% protection transportation. Packing with EPT regular export plywood instances components (free fumigation), inner packing with epe foams to stop merchandise swaying and outer packing with iron sheets and fasteners to fasten the packages.
4. Internationl income engineers have skilled expertise and skills on our common goods and service. They have ample capability to solve the basic technical difficulty immediately whatsoever by mobile phone, online chat, confront to face communications.
5. All the regular merchandise with 2d CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Versions (Stage, STP, Model, IGS, PRT and CATParT formats).
six. Customized design and style obtainable, OEM service accessible, Free engineering guidance, Free rates accessible and Buyer label accessible.
7. Inspection equipments incorporate motor with inverter travel technique, height adjustmemt motorized lifting method, coordinate measuring devices, exterior micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, electronic noise meters, industrial infrared thermometers, electronic velocity measuring instruments, electronic multimeters, and higher precision clamp electronic ammeter and so on. 
eight. Processing with modern advanced devices these kinds of as CNC equipment hobbing devices, CNC flank grinding devices, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and other folks equipments.

Completed Initiatives
1. Theatrical remedies stage and orchestra platform lifts projects. Buyers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 
2. Hydro EPT electrical power station initiatives and h2o conservancy tasks. Customers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom. 
3. Aircraft servicing platforms and docking systems assignments. Buyers are from Pakistan, Singapore and United Arab Emirates.  
4. Photo voltaic panel tracking system projects. Customers are from Spain, India and Canada. 
five. Bolted metal storage tanks and silos lifting remedies. Consumers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam. 
six. Dish antenna elevation and azimuth positioning tasks. Customers are from Singapore, Malaysia and United States. 
seven. Railway wagon assignments. Clients are from South Africa. 
8. Beverage can production traces. Consumers are from Netherlands, United States, Thailand and Indonesia. 
nine. Steel factories manufacturing strains. Buyers are from Iran, United States and Turkey. 
10. Continuous PU sandwich panel generation lines. Buyers are from Thailand and United Kingdom.  

JACTON Clients Regions(Nations around the world)
1. American Nations around the world: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.by way of, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
two. European Nations: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Ga, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
three. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
four. Oceanian Nations around the world: Australia, New Zealand, Fiji.
five. African Nations around the world: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

JACTON Items Checklist
one. Manual Screw Jacks, EPT Screw Jacks.
two. Screw Jacks Series: JT sequence acme screw jacks, JTC collection cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB collection ball screw jacks, JTD collection cubic ball screw jacks, JSS sequence stainless steel screw jacks, JTS collection bevel equipment screw jacks, Non-standard collection screw jacks. 
three. Bevel Gearboxes Series: JT collection bevel gearboxes, JTP sequence cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH sequence hollow shaft bevel gearboxes, BSS collection stainless steel bevel gearboxes.  
4. Lifting Techniques and Programs Equipment: two-jacks programs, a few-jacks systems, four-jacks techniques, six-jacks systems, eight-jacks systems. Components cover couplings, common joints, cardan shafts, connecting shafts, EPT motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod stop bearings, cease nuts, limit switches, security nut, vacation nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protecting tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and placement indicators etc.
five.  EPT Linear Actuators Series: Parallel heavy obligation linear actuators, In-line hefty obligation linear actuators.
six. Geared Motors and Pace Reducers Sequence: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, modest AC gear motor sequence and worm equipment motor reducer series.

Contact Information
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Funds 500000CNY) is a leading producer and supplier of  Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Techniques, EPT Linear Actuators, Gearmotors and Velocity Reducers, and Other folks Linear Movement and Electrical power Transmission Items in China.  We are Alibaba, Produced-In-China and SGS (Serial NO.: QIP-ASI192186) audited company and supplier. We also have a strict good quality method, with senior engineers, experienced skilled personnel and practiced revenue groups, we persistently offer the high high quality equipments to fulfill the clients electro-mechanical actuation, lifting and positioning needs. JACTON Market guarantees high quality, trustworthiness, efficiency and benefit for present-day demanding industrial purposes.
Internet site (English): 
Internet site (English): 
Website (Chinese):  /wp-material/uploads/2019/10/QzpcVXNlcnNcQWRtaW5pc3RyYXRvclxBcHBEYXRhXFJvYW1pbmdcRGluZ1RhbGtcMjQxNTc4Nzk5X3YyXEltYWdlRmlsZXNcMTA4MTAzMjdcMTg1NjAzMDcxMl85MjY3ODM0NTc3X2VwLWNvbnRhY3RzLmpwZw.jpg” alt=”Ideal China in Bologna Italy falk 1015g20 store Minature in Kitwe Zambia drum gear coupling sales Linear Actuators, Micro Leveling Jacks, Mini Screw Thread Elevate Company with best good quality lowest cost” >

Rubber China in Gebze Turkey falk 1040g20 near me R26 in Antipolo Philippines flexocon gear coupling Slurry Pump for Mining with top quality lowest price

Rubber China in Gebze Turkey falk 1040g20 near me R26 in Antipolo Philippines flexocon gear coupling Slurry Pump for Mining with top quality lowest price

We – EPG Team the largest couplings and gears factory in China with 5 distinct branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Rubber R26 Slurry Pump for Mining

Solution Show

Solution Description :

AH Collection Slurry Pumps Overview

Size selection (outlet)

1″to 18″(25mm to 450mm)

Potential

up to 22,000gpm(5,000m3/hr)

Head 

up to 240ft (73m)

Pressure 

up to 300psi(2,571KPa)

  EPT BRAND Type of AH series centrifugal slurry pumps are cantilevered,horizontal,slurry pumps.

1. They are made for the handling highly abrasive, large density slurry in the metallurgical, mining, coal, electricity, constructing content and other industrial departments and so on.

two. The pumps of this sort also can be installed in multistage sequence.

three. The body plates for kind NH centrifugal slurry pumps have replaceable use-resistant

     metal liners or rubber liners.

4. The impellers are produced of dress in resistant chrome alloy or rubber.

5. The frame plate liner and impeller for HH pump are adoptable of use-resistant metallic only .

6. The shaft seals for type NH centrifugal slurry pumps can be adoptable of gland seal or expeller seal.

seven. This Collection of Pumps are used conveying abrasive or corrosive slurry, particularly c EPT of energy plants in EPT power, metallurgy, mining, coal, creating materials, chemical market and other industrial sectors,etc.

Product Application

Organization Profile

Testing Tools

Packaging & Shipping

/ The use of original gear manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our firm and the shown EPT parts contained herein are not sponsored, approved, or created by the OEM. /

Rubber China in Gebze Turkey falk 1040g20 near me R26 in Antipolo Philippines flexocon gear coupling Slurry Pump for Mining with top quality lowest price