Cycloidal pinwheel reducer can be a up-dated of latest type transmissing machine designed with K-H-V less pearly whites engagement and the cycloidal pin wheel clenching mechanism, which are widely used in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical Industry, task machinery etc, cranes and conveyors. various fields.
Features:

1. Gear is made from high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is used for all gears, good call performance and with huge precision
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service life and high bearing capability;
5. easy to assemble, check and disassemble.

Operation specifications and precautions
1.High modularization design: various equip with various electric motor or other power source conveniently.Same machine type may equip with several power motor. It really is easy to understand the combination and
junction between every machine type.
2.Transmission ratio: great division, wide scope. The combined equipment type may form large transmission ratio, i.e. output suprisingly low rotary speed.
3.Form of assembly: the positioning to be installed isn’t limited.
4.High strength, compact: the box body is made of huge strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and good grinding process, therefore the bearing capability of unitvolume is excessive.
5.Long life: Under the condition of correct type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life of main parts of speed reducer (except sporting parts) should not be significantly less than 20000 hours. The putting on parts include lubricating bearing, oil and essential oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is certainly low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High velocity ratio and efficiency
Single stage transmission can reach to at least one 1:87 of speed-downwards ratio and the efficiency is usually a lot more than 90%. If use multi-speed travel the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic transmission basic principle, the input and end result shaft are in same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can understand high reduction ratio system.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are two gears engaged with 180 degree symmetry. As a result, the affect of tooth pitch error and cumulative tooth pitch mistake on the rotation accuracy is relatively average, which makes the position precision and rotation precision reach an extremely high level.
4. Less parts, convenient installation
The three basic pieces achieve a higher deceleration ratio, plus they are all on a single axis, so the kit is simple to install and simple to shape.
5. Small in size and light in weight
Compared with the previous gear device, the quantity is 1/3, the fat is 1/2, but can buy the same torque ability and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES unique steel with high fatigue strength.Not the same as ordinary transmission product, the number of teeth meshing makes up about in regard to 30% of the total number of teeth. Additionally, it is in call with the surface, to ensure that the pressure borne by each gear is reduced and huge torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss caused by friction. Therefore, high lowering ratio may be accomplished while maintaining high productivity, and miniaturization of driving motor could be realized.
8. Low noise
The apparatus meshing cycle swiftness is low, the transmission movement force balance, therefore the operation is quiet, and the vibration is quite small.
◆Substantial speed ratio and large efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission principle is adopted, the insight shaft and outcome shaft are on a single axis line, so that the machine unit can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts would make the vibration and voice limited by a minimum.
◆Reliable use and lengthy service life for the reason that main parts are made of high carbon chromium steel, large strength is certainly obtained by quenching (HRC58-62), and rolling friction is employed in a few transmission contacts, so the service life is very long.
Cycloid reducer is normally a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has many advantages, versatile, and can be both positive and negative operation.

•Big ratio, and substantial efficiency Smooth operation,

• low noise The make use of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically no wear, durable.

• Compact structure,

• little size Because the utilization of a planetary transmission, the insight shaft and the result shaft on a single axis, which makes the model to get the smallest possible size.

• Reasonable design, easy protection, and break down easily install,

• the least number of parts in addition to simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion improve the output strength, precision and carrier.

(2).Hoop clamp coupling have five connection ways suited to different application environments.

(3).Size above PL/PF120(including)precision and high power integral inner gear housing, processed in a single station,which eradicate the cumulative error and assembling error of split type.Eliminate casting process;adopt popular of forging process, which will decrease the blank material defects.

(4).The meshing equipment adopt shaving procedure after carburizing and quenching,which easier to make gear surface smooth and high accuracy,decrease the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was designed after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its overall performance and mounting dime nsions conform the same varieties of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, radiate heat efficiently, compact structure and beautiful shape.
Great sealing and adaptability.Its mixture with T gear reducer and MB/MBN variator can meet all types of speed requirement.